Makmast
27-06-2006, 23:40
ragazzi ho ricompilato il kernel come faccio di solito 2.6.16.9, ma il pc vi ma in alcuni momenti abbastanza lento, e non riesco a capire cosa possa essere, quali info vi posso dare per aiutarmi a capire che problema potrei avere?? Inizio con il dmesg che mi sembra normale....
E' un notebook asus a6va con Debian Sid....i pacchetti sono tutti aggiornati
rupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: b000-dfff
MEM window: fea00000-feafffff
PREFETCH window: cff00000-dfefffff
PCI: Bus 2, cardbus bridge: 0000:01:01.0
IO window: 0000a000-0000a0ff
IO window: 0000a400-0000a4ff
PREFETCH window: 30000000-31ffffff
MEM window: 34000000-35ffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: fe900000-fe9fffff
PREFETCH window: 30000000-32ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 177
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1151451132.866:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.26 [Flags: R/W DEBUG].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Using IPI Shortcut mode
ACPI wakeup devices:
P0P1 CBS0 P394 CRD0 CRD1 MPCI LAN0 USB1 USB2 USB3 USB4 EUSB MC97 AZAL SLPB
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: journal-1153: found in header: first_unflushed_offset 2395, last_flushed_trans_id 321930
ReiserFS: hda1: journal-1206: Starting replay from offset 1382683116570971, trans_id 2957163904
ReiserFS: hda1: journal-1299: Setting newest_mount_id to 365
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 156k freed
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Real Time Clock Driver v1.12ac
irda_init()
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:01:01.0 [1043:1177]
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ieee1394: Initialized config rom entry `ip1394'
sr1: scsi-1 drive
sr 0:0:0:1: Attached scsi CD-ROM sr1
USB Universal Host Controller Interface driver v2.3
sr2: scsi-1 drive
sr 0:0:0:2: Attached scsi CD-ROM sr2
Yenta: ISA IRQ mask 0x0438, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xfe900000 - 0xfe9fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff
ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 18 (level, low) -> IRQ 185
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[fe9fe000-fe9fe7ff] Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000e480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sr3: scsi-1 drive
sr 0:0:0:3: Attached scsi CD-ROM sr3
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
sr4: scsi-1 drive
sr 0:0:0:4: Attached scsi CD-ROM sr4
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: PC Speaker as /class/input/input2
sr5: scsi-1 drive
sr 0:0:0:5: Attached scsi CD-ROM sr5
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sr6: scsi-1 drive
sr 0:0:0:6: Attached scsi CD-ROM sr6
ieee80211_crypt: registered algorithm 'NULL'
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000e880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
sr 0:0:0:0: Attached scsi generic sg0 type 5
sr 0:0:0:1: Attached scsi generic sg1 type 5
sr 0:0:0:2: Attached scsi generic sg2 type 5
sr 0:0:0:3: Attached scsi generic sg3 type 5
sr 0:0:0:4: Attached scsi generic sg4 type 5
sr 0:0:0:5: Attached scsi generic sg5 type 5
sr 0:0:0:6: Attached scsi generic sg6 type 5
usb 2-2: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000ec00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 209
skge 1.3 addr 0xfe9f8000 irq 209 chip Yukon-Lite rev 9
skge eth0: addr 00:13:d4:bf:94:6c
mice: PS/2 mouse device common for all mice
usb 2-2: configuration #1 chosen from 1 choice
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usb 5-1: new full speed USB device using uhci_hcd and address 2
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x37f 0x400-0x41f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
ipw2200: ipw-2.4-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:01:03.0 failed with error -5
hw_random: RNG not detected
usb 5-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800033a31c6]
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Adding 979924k swap on /dev/hda5. Priority:-1 extents:1 across:979924k
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Asus Laptop ACPI Extras version 0.29
no string returned by INIT
trying default values, supply the developers with your DSDT
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [email protected]
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hda6: warning: - it is slow mode for debugging.
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: journal-1153: found in header: first_unflushed_offset 4756, last_flushed_trans_id 305888
ReiserFS: hda6: journal-1206: Starting replay from offset 1313783251210900, trans_id 2957163904
ReiserFS: hda6: journal-1299: Setting newest_mount_id to 360
ReiserFS: hda6: Using r5 hash to sort names
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
hw_random: RNG not detected
skge eth0: enabling interface
skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC0] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FN00] (off)
ACPI: Thermal Zone [THRM] (41 C)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[fglrx] total GART = 67108864
[fglrx] free GART = 51118080
[fglrx] max single GART = 51118080
[fglrx] total LFB = 127954944
[fglrx] free LFB = 119762944
[fglrx] max single LFB = 119762944
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
grazie x un eventuale aiuto
E' un notebook asus a6va con Debian Sid....i pacchetti sono tutti aggiornati
rupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: b000-dfff
MEM window: fea00000-feafffff
PREFETCH window: cff00000-dfefffff
PCI: Bus 2, cardbus bridge: 0000:01:01.0
IO window: 0000a000-0000a0ff
IO window: 0000a400-0000a4ff
PREFETCH window: 30000000-31ffffff
MEM window: 34000000-35ffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: fe900000-fe9fffff
PREFETCH window: 30000000-32ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 177
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1151451132.866:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.26 [Flags: R/W DEBUG].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
Vendor: TSSTcorp Model: CD/DVDW TS-L532A Rev: TI51
Type: CD-ROM ANSI SCSI revision: 00
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Using IPI Shortcut mode
ACPI wakeup devices:
P0P1 CBS0 P394 CRD0 CRD1 MPCI LAN0 USB1 USB2 USB3 USB4 EUSB MC97 AZAL SLPB
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: journal-1153: found in header: first_unflushed_offset 2395, last_flushed_trans_id 321930
ReiserFS: hda1: journal-1206: Starting replay from offset 1382683116570971, trans_id 2957163904
ReiserFS: hda1: journal-1299: Setting newest_mount_id to 365
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 156k freed
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Real Time Clock Driver v1.12ac
irda_init()
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:01:01.0 [1043:1177]
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ieee1394: Initialized config rom entry `ip1394'
sr1: scsi-1 drive
sr 0:0:0:1: Attached scsi CD-ROM sr1
USB Universal Host Controller Interface driver v2.3
sr2: scsi-1 drive
sr 0:0:0:2: Attached scsi CD-ROM sr2
Yenta: ISA IRQ mask 0x0438, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xfe900000 - 0xfe9fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff
ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 18 (level, low) -> IRQ 185
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[fe9fe000-fe9fe7ff] Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000e480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sr3: scsi-1 drive
sr 0:0:0:3: Attached scsi CD-ROM sr3
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
sr4: scsi-1 drive
sr 0:0:0:4: Attached scsi CD-ROM sr4
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: PC Speaker as /class/input/input2
sr5: scsi-1 drive
sr 0:0:0:5: Attached scsi CD-ROM sr5
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sr6: scsi-1 drive
sr 0:0:0:6: Attached scsi CD-ROM sr6
ieee80211_crypt: registered algorithm 'NULL'
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000e880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
sr 0:0:0:0: Attached scsi generic sg0 type 5
sr 0:0:0:1: Attached scsi generic sg1 type 5
sr 0:0:0:2: Attached scsi generic sg2 type 5
sr 0:0:0:3: Attached scsi generic sg3 type 5
sr 0:0:0:4: Attached scsi generic sg4 type 5
sr 0:0:0:5: Attached scsi generic sg5 type 5
sr 0:0:0:6: Attached scsi generic sg6 type 5
usb 2-2: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000ec00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 209
skge 1.3 addr 0xfe9f8000 irq 209 chip Yukon-Lite rev 9
skge eth0: addr 00:13:d4:bf:94:6c
mice: PS/2 mouse device common for all mice
usb 2-2: configuration #1 chosen from 1 choice
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usb 5-1: new full speed USB device using uhci_hcd and address 2
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x37f 0x400-0x41f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
ipw2200: ipw-2.4-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:01:03.0 failed with error -5
hw_random: RNG not detected
usb 5-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800033a31c6]
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Adding 979924k swap on /dev/hda5. Priority:-1 extents:1 across:979924k
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Asus Laptop ACPI Extras version 0.29
no string returned by INIT
trying default values, supply the developers with your DSDT
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [email protected]
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hda6: warning: - it is slow mode for debugging.
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: journal-1153: found in header: first_unflushed_offset 4756, last_flushed_trans_id 305888
ReiserFS: hda6: journal-1206: Starting replay from offset 1313783251210900, trans_id 2957163904
ReiserFS: hda6: journal-1299: Setting newest_mount_id to 360
ReiserFS: hda6: Using r5 hash to sort names
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
hw_random: RNG not detected
skge eth0: enabling interface
skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC0] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FN00] (off)
ACPI: Thermal Zone [THRM] (41 C)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[fglrx] total GART = 67108864
[fglrx] free GART = 51118080
[fglrx] max single GART = 51118080
[fglrx] total LFB = 127954944
[fglrx] free LFB = 119762944
[fglrx] max single LFB = 119762944
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
grazie x un eventuale aiuto