frhell
15-05-2006, 21:34
Vendo scheda madre ecs p4s5a/dx+ perfettamente funzionante
http://www.ocworkbench.com/hardware/elite/p4s5a/PDRM0056_copy.jpg
caratteristiche:
PROCESSORS
One Socket 478 supports the
Intel Pentium 4 processor (478pins)
Chipset
XP4 & SiS961 Chipset
XP4 Host/Memory controller with DDR333 and AGP4X North Bridge Single Chipset
SiS961 MuTIOL Media I/O
LPC I/O - ITE8705F
System Hardware Monitor: Integrated in ITE8705F
LAN: MAC Integrated in SiS961 & PHY on board (optional)
AC97 Audio Codec
Compliant with AC97 2.1 specification
System BIOS
AMI 2Mb Flash EEPROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Full support for ACPI revision 1.0 specification
Memory
2 DDR DIMM Sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin 2.5V DDR SDRAM (DDR333) or
Two 168-pin 3.3V SDRAM (PC133/PC100)
Maximum: 2GB (DDR SDRAM or SDRAM)
I/O Interface
Supports Plug and Play function
PS/2 keyboard and PS/2 mouse connectors
Dual USB Ports and LAN connector (optional)
One - EPP/ECP mode parallel port
Two - 16550 high-speed serial I/O ports
Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
Dual PCI IDE interfaces - support four IDE
devices (PIO mode 4, DMA Mode 2, Ultra DMA 66/100)
Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
ATX Power Supply Connector
Ports, headers and others
IrDA header
Front Panel MIC/Line-Out Header
Two Extra USB Headers
HDD LED, Reset Switch, Power Switch headers
CPU and System Fan headers
LAN Card Wake Up header
RTC & Battery
SiS961 built-in 256 byte of CMOS SRAM
With CMOS hardware clear jumper
Expansion Slots
5 PCI slots, 1 AGP slot, 1 AMR slot
Form Factor & LayerS
ATX (305mm*244mm), 4 Layers
Vendo a 34€ + ss
http://www.ocworkbench.com/hardware/elite/p4s5a/PDRM0056_copy.jpg
caratteristiche:
PROCESSORS
One Socket 478 supports the
Intel Pentium 4 processor (478pins)
Chipset
XP4 & SiS961 Chipset
XP4 Host/Memory controller with DDR333 and AGP4X North Bridge Single Chipset
SiS961 MuTIOL Media I/O
LPC I/O - ITE8705F
System Hardware Monitor: Integrated in ITE8705F
LAN: MAC Integrated in SiS961 & PHY on board (optional)
AC97 Audio Codec
Compliant with AC97 2.1 specification
System BIOS
AMI 2Mb Flash EEPROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Full support for ACPI revision 1.0 specification
Memory
2 DDR DIMM Sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin 2.5V DDR SDRAM (DDR333) or
Two 168-pin 3.3V SDRAM (PC133/PC100)
Maximum: 2GB (DDR SDRAM or SDRAM)
I/O Interface
Supports Plug and Play function
PS/2 keyboard and PS/2 mouse connectors
Dual USB Ports and LAN connector (optional)
One - EPP/ECP mode parallel port
Two - 16550 high-speed serial I/O ports
Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
Dual PCI IDE interfaces - support four IDE
devices (PIO mode 4, DMA Mode 2, Ultra DMA 66/100)
Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
ATX Power Supply Connector
Ports, headers and others
IrDA header
Front Panel MIC/Line-Out Header
Two Extra USB Headers
HDD LED, Reset Switch, Power Switch headers
CPU and System Fan headers
LAN Card Wake Up header
RTC & Battery
SiS961 built-in 256 byte of CMOS SRAM
With CMOS hardware clear jumper
Expansion Slots
5 PCI slots, 1 AGP slot, 1 AMR slot
Form Factor & LayerS
ATX (305mm*244mm), 4 Layers
Vendo a 34€ + ss