zxrzxr
01-05-2006, 14:46
ciao ,un mio amico ha la suddetta schaeda madre :
CPU
• Supports Socket 478 for Intel® Pentium 4 processor
• Supports 1.3GHz, 1.4GHz and up to 2.2GHz
Chipset
• Intel® 845 Chipset
- AGP 4x slot
- Support PC133 SDRAM
• Intel® ICH2 Chipset
- AC'97 Controller Integrated
- 2 full IDE channels, up to ATA100
- Low pin count interface for Winbond SIO
FSB
• Supports 100MHz FSB
• Supports 400MHz Intel NetBurst micro-architecture bus
Main Memory
• Supports two 168-pin DIMM sockets
• Supports 32MB to 1GB memory using 512Mbit technology
• Max. memory size: 2GB
Note: As 845 chipset does not properly support the PC100 memory, it is strongly recommended to install PC133 DIMM modules for better system performance and stability. We do not guarantee the system stability when installing PC 100 DIMM modules.
Slots
• One AGP (Accelerated Graphics Port) 4x (1.5V only)
NOTE : The AGP slot DOES NOT support 3.3V AGP 2x card. Use of 3.3V AGP 2x card may cause damages to the mainboard. To identify the spec of your AGP card, refer to the documentation supplied with the AGP card or check the view of its contact pins (golden fingers) before you install it.
• Three PCI 2.2 32-bit Master PCI Bus slots
• Supports 3.3v/5v PCI bus Interface
• One CNR slot
On-Board IDE
• An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with PIO, Bus Master
and Ultra DMA 66/100 operation modes.
• Can connect up to four IDE devices.
Promise 20378 On-Board
Audio
• 2-channel Audio Codec
• 4-channel Audio Codec (Optional)
- AC'97 2.1 compliant
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
- 2 serial ports (COMA / COMB)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (Rear x 2 / Front x 2)
- PS/2 Keyboard/Mouse connector
- 1 Line-In/Line-Out/Mic-In/Game port
visto che gli ho gia' preso una scheda video ATI RADEON 9250 128MB AGP8X/Tv-out,adesso o dei dubbi visto che la scheda e una agp8x e la sua scheda madre sopporta fino a 4x,potrebbe avere dei problemi? posso montargli le ram DDR333 O 400?
grazie ciao
CPU
• Supports Socket 478 for Intel® Pentium 4 processor
• Supports 1.3GHz, 1.4GHz and up to 2.2GHz
Chipset
• Intel® 845 Chipset
- AGP 4x slot
- Support PC133 SDRAM
• Intel® ICH2 Chipset
- AC'97 Controller Integrated
- 2 full IDE channels, up to ATA100
- Low pin count interface for Winbond SIO
FSB
• Supports 100MHz FSB
• Supports 400MHz Intel NetBurst micro-architecture bus
Main Memory
• Supports two 168-pin DIMM sockets
• Supports 32MB to 1GB memory using 512Mbit technology
• Max. memory size: 2GB
Note: As 845 chipset does not properly support the PC100 memory, it is strongly recommended to install PC133 DIMM modules for better system performance and stability. We do not guarantee the system stability when installing PC 100 DIMM modules.
Slots
• One AGP (Accelerated Graphics Port) 4x (1.5V only)
NOTE : The AGP slot DOES NOT support 3.3V AGP 2x card. Use of 3.3V AGP 2x card may cause damages to the mainboard. To identify the spec of your AGP card, refer to the documentation supplied with the AGP card or check the view of its contact pins (golden fingers) before you install it.
• Three PCI 2.2 32-bit Master PCI Bus slots
• Supports 3.3v/5v PCI bus Interface
• One CNR slot
On-Board IDE
• An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with PIO, Bus Master
and Ultra DMA 66/100 operation modes.
• Can connect up to four IDE devices.
Promise 20378 On-Board
Audio
• 2-channel Audio Codec
• 4-channel Audio Codec (Optional)
- AC'97 2.1 compliant
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
- 2 serial ports (COMA / COMB)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (Rear x 2 / Front x 2)
- PS/2 Keyboard/Mouse connector
- 1 Line-In/Line-Out/Mic-In/Game port
visto che gli ho gia' preso una scheda video ATI RADEON 9250 128MB AGP8X/Tv-out,adesso o dei dubbi visto che la scheda e una agp8x e la sua scheda madre sopporta fino a 4x,potrebbe avere dei problemi? posso montargli le ram DDR333 O 400?
grazie ciao