PDA

View Full Version : Cavi adatti per connessione 1Gbit


poe_ope
21-04-2006, 14:52
Spero di non fare la classica domanda scema da neofita... Volevo sapere se per fare una connessione PC - switch a 1Gb (sul pc ovviamente ho una scheda ethernet a 1Gb) è tassativo avere dei cavi di categoria "superiore" dei classici cavetti che già uso per le normali connessioni a 100Mbit.

Qualsiasi chiarimento è bene accetto!!! :D

Ciao e grazie!
Marco

Stev-O
21-04-2006, 15:45
metterei cat6

poe_ope
21-04-2006, 17:51
Temevo... :( Il fatto è che ho già fatto cablare una parte della casa che sto ristrutturando, e non ci avevo proprio pensato...

Peggio per me... :doh:

Ciao e grazie!
Marco

Stev-O
21-04-2006, 19:47
mmm
può darsi che su una tratta molto breve anche il cat5 un po' tenga....
non è indicato pero'...

wgator
21-04-2006, 23:56
Ciao,

Come confermato da questo articolo, va bene anche il 5e


1000BASE-T or 802.3ab is a standard for Gigabit Ethernet over copper wiring. It requires, at a minimum, Cat 5e ("Category 5 enhanced") cable. Category 6 cable may also be used. The 1000BASE-T standard was approved by the IEEE 802.3 in 1999.

In a departure from both 10BASE-T and 100BASE-TX, 1000BASE-T uses all four cable pairs for simultaneous transmission in both directions through the use of echo cancellation and a 5-level pulse amplitude modulation (PAM-5) technique. The symbol rate is identical to that of 100BASE-TX (125 Ms/s) and the noise immunity of the 5-level signaling is also identical to that of the 3-level signaling in 100BASE-Tx, since 1000BASE-T uses 4-Dimensional Trellis Coded Modulation (TCM) to achieve a 6 dB coding gain across the 4 pairs.

Furthermore, auto-negotiation is a requirement for using 1000BASE-T[1].

Each network segment can have a maximum distance of 100 metres. This usually consists of 90 m horizontal (inside the building), 9 m at the patch panel, and 1 m from the port to the computer or node.

Fonte: http://www.answers.com/main/ntquery;jsessionid=9ctaqoj4fg91s?method=4&dsid=2222&dekey=1000BASE-T&curtab=2222_1&sbid=lc05b&linktext=1000BASE-T

Stev-O
22-04-2006, 11:22
prendilo buon cmq il cat5e altrimenti avrai inevitabilmente delle perdite

renatox
22-04-2006, 14:23
dopo prove personali,sconsiglio l'uso di un cavo cat 5E
si consiglia di usare cat 6E schermato
si evitano così problemi di disturbo con altre apparecchiature