Nessuno87
16-03-2006, 19:40
ciao ragazzi,
sono nuovo del forum, e vi volevo chiedere come potevo overcloccare il mio processore.
girando per internet e sentendo degli amici sono riuscito a portarlo da 2.4 a 2.68 ghz, ma volevo sapere se posso spingerlo ancora di pił. ero riuscito a portarlo fino a 3ghz, ma al boot di windows mi si bloccava :mad: :muro: o mi dava degli errori quali file mancante o cartella mancante.
la mia configurazione e la seguente:
Name Intel Celeron
Code Name Northwood
Specification Intel(R) Celeron(R) CPU 2.40GHz
Family / Model / Stepping F 2 9
Extended Family / Model 0 0
Brand ID 10
Package mPGA-478
Core Stepping D1
Technology 0.13 um
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 2688.0 MHz
Clock multiplier x 24.0
Front Side Bus Frequency 112.0 MHz
Bus Speed 448.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kuops, 8-way set associative
L2 Cache 128 KBytes, 2-way set associative, 64 Bytes line size
L2 Speed 2688.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model P4V800-X, Rev 1.xx
BIOS vendor American Megatrends Inc.
BIOS revision 1001.025
BIOS release date 08/28/2003
Chipset VIA PT800 (VT8754) rev. 82
Southbridge VIA VT8237 rev. 00
Sensor chip Winbond W83627THF
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfer Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing not supported, not enabled
Memory
DRAM Type DDR-SDRAM
DRAM Size 256 MBytes
DRAM Frequency 178.7 MHz
FSB: DRAM FSB + 66 MHz
DRAM Interleave 4-way
CAS# Latency 3.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 5 clocks
# of memory modules 1
Module 0 DDR-SDRAM PC3200 - 256 MBytes
Software
Windows version Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX version 9.0c
con i vostri consigli spero di riuscire a sfruttare ancora di pił questo processore!!! :help:
vi ringrazio anticipatamente
sono nuovo del forum, e vi volevo chiedere come potevo overcloccare il mio processore.
girando per internet e sentendo degli amici sono riuscito a portarlo da 2.4 a 2.68 ghz, ma volevo sapere se posso spingerlo ancora di pił. ero riuscito a portarlo fino a 3ghz, ma al boot di windows mi si bloccava :mad: :muro: o mi dava degli errori quali file mancante o cartella mancante.
la mia configurazione e la seguente:
Name Intel Celeron
Code Name Northwood
Specification Intel(R) Celeron(R) CPU 2.40GHz
Family / Model / Stepping F 2 9
Extended Family / Model 0 0
Brand ID 10
Package mPGA-478
Core Stepping D1
Technology 0.13 um
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 2688.0 MHz
Clock multiplier x 24.0
Front Side Bus Frequency 112.0 MHz
Bus Speed 448.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kuops, 8-way set associative
L2 Cache 128 KBytes, 2-way set associative, 64 Bytes line size
L2 Speed 2688.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model P4V800-X, Rev 1.xx
BIOS vendor American Megatrends Inc.
BIOS revision 1001.025
BIOS release date 08/28/2003
Chipset VIA PT800 (VT8754) rev. 82
Southbridge VIA VT8237 rev. 00
Sensor chip Winbond W83627THF
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfer Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing not supported, not enabled
Memory
DRAM Type DDR-SDRAM
DRAM Size 256 MBytes
DRAM Frequency 178.7 MHz
FSB: DRAM FSB + 66 MHz
DRAM Interleave 4-way
CAS# Latency 3.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 5 clocks
# of memory modules 1
Module 0 DDR-SDRAM PC3200 - 256 MBytes
Software
Windows version Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX version 9.0c
con i vostri consigli spero di riuscire a sfruttare ancora di pił questo processore!!! :help:
vi ringrazio anticipatamente