[Ati] Nuovi driver per GNU/Linux [Archivio]

View Full Version : [Ati] Nuovi driver per GNU/Linux

CARVASIN

09-03-2006, 23:47

http://www.rage3d.com/board/showthread.php?t=33847789

k0nt3

10-03-2006, 15:23

http://www.rage3d.com/board/showthread.php?t=33847789
li ho installati... tu hai notato miglioramenti tangibili? a me sembra lievemente più veloce, ma non ho ancora valutato bene.. chissà forse questa è la volta che si mettono a fare drivers seri :)

CARVASIN

10-03-2006, 15:52

li ho installati... tu hai notato miglioramenti tangibili? a me sembra lievemente più veloce, ma non ho ancora valutato bene.. chissà forse questa è la volta che si mettono a fare drivers seri :)
no ancora li devo installare...giusto 3 giorni fa sono passato da ubuntu a debian. rifai de qua rifai de li de su de giù, e avevo installato i vecchi? (8.22?!) :cry:
domenica vedo di metterli, adesso ho esaurito tutte le mie forze (soprattutto psicologiche!! :D ). speriamo bene

ciao

CARVASIN

11-03-2006, 13:49

mi restituisce questo errore
/tmp/fglrx /home/carvasin/fglrx-install
Package build failed!
Package build utility output:
dpkg-buildpackage: source package is fglrx-installer
dpkg-buildpackage: source version is 8.23.7-1
dpkg-buildpackage: source changed by ATI Technologies Inc. <http://www.ati.com/support/driver.html>
dpkg-buildpackage: host architecture i386
debian/rules build
dh_testdir
make: dh_testdir: Command not found
make: *** [build] Error 127
/home/carvasin/fglrx-install
[Error] Generate Package - error generating package : Debian/unstable

cosa può essere?!

PS: come se non bastasse ieri ho fatto dei mega casini e ho dovuto reinstallare tutta debian!! :D

k0nt3

11-03-2006, 13:54

k0nt3

11-03-2006, 13:56

mi sembra di capire che un apt-get install debhelper risolve tutto ;)

CARVASIN

11-03-2006, 13:57

madonna che angoscia!! :muro: pochi giorni fa li ha installati normalmente (quelli vecchi)....vediamo un po cos'è
grazie!

ciao

CARVASIN

11-03-2006, 14:02

mi sembra di capire che un apt-get install debhelper risolve tutto ;)
perfettamente ragione!! grazie mille!! :)
ora vado ad installarli

ciao

CARVASIN

11-03-2006, 14:59

con fgl_glxgears faccio 400 fps...comunque vanno!

piccolo OT: credi che con una 9550 (la ati che ho io :fagiano: ) ci girerà bene Xgl ?(parlo di quando sarà usato in maniera stabile)

k0nt3

11-03-2006, 15:17

con fgl_glxgears faccio 400 fps...comunque vanno!

piccolo OT: credi che con una 9550 (la ati che ho io :fagiano: ) ci girerà bene Xgl ?(parlo di quando sarà usato in maniera stabile)
io ho una 9600pro e gira molto bene, non credo che la tua 9550 incontrerà difficoltà :D! penso che anche su una 9100 girerà (magari anche sulla mia vecchia voodoo3.. lo proverò)! il problema sono sempre i drivers, se inizieranno a ottimizzarli un pò per xgl la situazione può solo migliorare :) spero che ATI raccolga la sfida.

pigro85

17-03-2006, 00:54

io ho una 9600pro e gira molto bene, non credo che la tua 9550 incontrerà difficoltà :D! penso che anche su una 9100 girerà (magari anche sulla mia vecchia voodoo3.. lo proverò)! il problema sono sempre i drivers, se inizieranno a ottimizzarli un pò per xgl la situazione può solo migliorare :) spero che ATI raccolga la sfida.
:sperem:

Cimi

17-03-2006, 12:04

k0nt3

17-03-2006, 12:16

la scelta più intelligente secondo me è raccogliere la sfida e buttare quella 9600pro.
e con che coraggio comprerei una geforce? è più forte di me! 3dfx rulez :fuck:

ps. non c'è niente di razionale in quello che ho detto :asd:

CARVASIN

17-03-2006, 13:21

la scelta più intelligente secondo me è raccogliere la sfida e buttare quella 9600pro.
quioto, sto pensando seriamente di prendermi una 6600 (o giù di li). trovata a 60 euro circa

edit: 6200

pigro85

22-03-2006, 00:16

Bhè, penso che possa essere utile.
http://wiki.cchtml.com/index.php/Main_Page

Hal2001

22-03-2006, 00:33

edit: 6200

Non prendere nulla sotto una 6600GT, altrimenti son soldi buttati.

CARVASIN

22-03-2006, 06:29

Non prendere nulla sotto una 6600GT, altrimenti son soldi buttati.
dici? considera che io non ho nessuna richiesta videoludica. devo solo far girare, in maniera decente, il server X e guardarmi qualche dvd/divx

Hal2001

22-03-2006, 09:22

Per il futuro potrebbe fare comodo avere delle funzioni di PureVideo abilitate.

k0nt3

22-03-2006, 11:04

per uno che non gioca comprare schede sopra la 6200 vuol dire buttare soldi ;)

Hal2001

22-03-2006, 12:55

per uno che non gioca comprare schede sopra la 6200 vuol dire buttare soldi ;)

Accelerare un minimo il 3D non significa per forza di cose giocare :)

CARVASIN

22-03-2006, 16:45

il mio target è far girare decentemente XGL, tanto per capirci. anche se di XGL non è che me ne freghi molto :D era più per lasciare Ati e passare ad Nvidia.
nella speranza che terranno ancora qualche scheda agp, aspetto ancora un po di tempo, quando le 6600 scenderanno, se scenderanno, di prezzo (se no aspetto molto di più e se ne riparla quando cambierò MB)
grazie per le risposte :)

ciao

LiLL0

14-04-2006, 13:10

Sono usciti i nuovi driver Ati con supporto alle schede della serie X1X00
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.24.8.html

sanford

25-04-2006, 01:09

e con che coraggio comprerei una geforce? è più forte di me! 3dfx rulez :fuck:

Sei già dei nostri su Forumzone? (http://www.forumzone.it)

sanford

25-04-2006, 17:00

Scusate ma, già che si parla di drivers ATI me la dareste una mano? Ho scaricato e installato quelli linkati da LiLLO su Mandriva 2006 ma continuano a funzionare le MesaGL... :(

Ecco il mio XORG.CONF:

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "FLATRON 995FT Plus"
HorizSync 30-96
VertRefresh 50-160

# Monitor preferred modeline (85.0 Hz vsync, 91.1 kHz hsync, ratio 5/4)
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor2"
VendorName "Plug'n Play"
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor3"
VendorName "Plug'n Play"

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 15
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 15
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection

Section "Screen"
Identifier "screen3"
Device "ATI Graphics Adapter 0"
Monitor "monitor3"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 15
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
Screen "screen2" RightOf "screen1"
Screen "screen3" RightOf "screen2"
#Option "Xinerama"
EndSection

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)

# allows the server to start up even if the mouse does not work
Option "allowmouseopenfail"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Device"
Identifier "device1"
Driver "fglrx"
Option "DPMS"
EndSection

Section "Device"
Identifier "device2"
VendorName "ATI"
BoardName "ATI Radeon"
Driver "fglrx"
BusID "PCI:1:0:1"
Option "DPMS"
EndSection

Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection

Qualcuno mi aiuti, non riesco a uscirne...maledetta ATI. :mad:

k0nt3

25-04-2006, 17:17

Sei già dei nostri su Forumzone? (http://www.forumzone.it)
mmmno... e credo che malauguratamente non avrò il tempo di esserlo :(

sanford

25-04-2006, 17:19

mmmno... e credo che malauguratamente non avrò il tempo di esserlo :(

Dovresti trovarlo il tempo, la tua Voodoo 3 non è ancora sfruttata come si deve... ;)

Mi aiuti con questi maledetti drivers?

sanford

25-04-2006, 18:07

Mmm forse ho capito da solo, io ho XOrg 6.9.0 e i drivers sono per XOrg 6.8.0 magari è proprio questo il problema, o no? :mbe:

zephyr83

25-04-2006, 20:31

Mmm forse ho capito da solo, io ho XOrg 6.9.0 e i drivers sono per XOrg 6.8.0 magari è proprio questo il problema, o no? :mbe:
nn credo io ho xorg 7 e ho installato ugualmente i driver ati che sn solo per xorg 6.8

sanford

25-04-2006, 22:42

E allora puoi darmi qualche suggerimento?

Nel mio xorg.conf c'è niente fuori posto secondo te?

zephyr83

25-04-2006, 23:26

E allora puoi darmi qualche suggerimento?

Nel mio xorg.conf c'è niente fuori posto secondo te?
mi dispaice nn saprei proprio!

beppegrillo

26-04-2006, 16:07

Non và un cavolo di niente
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
fglrx: Unknown symbol inter_module_unregister
fglrx: Unknown symbol inter_module_get_request
fglrx: Unknown symbol inter_module_put
fglrx: Unknown symbol inter_module_register
fglrx: Unknown symbol inter_module_unregister
fglrx: Unknown symbol inter_module_get_request
fglrx: Unknown symbol inter_module_put
fglrx: Unknown symbol inter_module_register

sanford

26-04-2006, 17:09

Nemmeno a te funziona? Puoi dirmi che distro usi e la versione di XOrg?

beppegrillo

26-04-2006, 19:00

Nemmeno a te funziona? Puoi dirmi che distro usi e la versione di XOrg?
Sono riuscito a sistemare il tutto, la distribuzione è una slackware current.
Cmq ho fatto le seguenti cose
1) Aggiunto il modulo (deprecato) intermodule all'ultimo kernel
2) abilitato l'agp interno al modulo
3) aggiunta la voce /dev/shm in fstab

e tutto sembra andare per il meglio
Using GLX_SGIX_pbuffer
2848 frames in 5.0 seconds = 569.600 FPS
3050 frames in 5.0 seconds = 610.000 FPS
3077 frames in 5.0 seconds = 615.400 FPS
2882 frames in 5.0 seconds = 576.400 FPS
3145 frames in 5.0 seconds = 629.000 FPS
3151 frames in 5.0 seconds = 630.200 FPS
3133 frames in 5.0 seconds = 626.600 FPS

Grazie per l'interesse :)

sanford

26-04-2006, 19:03

Sono riuscito a sistemare il tutto, la distribuzione è una slackware current.
Cmq ho fatto le seguenti cose
1) Aggiunto il modulo (deprecato) intermodule all'ultimo kernel
2) abilitato l'agp interno al modulo
3) aggiunta la voce /dev/shm in fstab

e tutto sembra andare per il meglio

Grazie per l'interesse :)

Mmm, su Mandriva le operazioni sono le stesse?

Mi fai un passo-passo se ti va? Sono ancora molto niubbo con Linux... :(

beppegrillo

26-04-2006, 19:22

Mmm, su Mandriva le operazioni sono le stesse?

Mi fai un passo-passo se ti va? Sono ancora molto niubbo con Linux... :(
hai i miei stessi errori?
http://www.slackware-italia.com/forum/viewtopic.php?p=12636 guarda il terzo msg.
Poi mi fai sapere come và.

P.s Ora non ho tempo per una guida passo passo, sorry.

k0nt3

26-04-2006, 20:53

Dovresti trovarlo il tempo, la tua Voodoo 3 non è ancora sfruttata come si deve... ;)

Mi aiuti con questi maledetti drivers?
ho continuato a usare drivers non ufficiali per un pò... adesso dopo qualche anno di assenza mi è tornato il buon caro vecchio pc :) ed è in attesa di essere formattato per servire a qualcosa :D .

comunque mi sembra che il tuo xorg.conf sia un tantino incasinato... ti consiglio di rifare da capo ;)

ps. hai dato il comando "aticonfig --initial" da root alla fine?

sanford

26-04-2006, 21:51

hai i miei stessi errori?

No, da me i drivers si installano perfettamente ma quando do il comando fglrxinfo mi dice che ci sono ancora le MesaGL.

sanford

26-04-2006, 22:00

comunque mi sembra che il tuo xorg.conf sia un tantino incasinato... ti consiglio di rifare da capo ;)

ps. hai dato il comando "aticonfig --initial" da root alla fine?

Il mio xorg.conf è personalizzato per il mio monitor altrimenti i drivers mi danno 75hz e non 85, comunque ho provato più volte con entrambi ma non cambia nulla

Gliel'ho fatto ricreare da capo almeno una ventina di volte da zero, aticonfig --initial l'ho dato da root dopo l'installazione e prima di riavviare, al riavvio schermo a 75hz ma sempre MesaGL, metto "fglrx" al posto di "radeon" e "ati" nel file xorg.conf ma non cambia niente, se sbaglio qualcosa mi parte in riga di comando e devo dare "aticonfig --initial -f" e poi "aticonfig --resolution=1280x1024,1024x768,800x600" per poter ripartire in ambiente grafico, provato e riprovato fino allo sfinimento. :(

k0nt3

26-04-2006, 22:03

sanford

26-04-2006, 22:06

il problema è che non basta sostituire radeon con fglrx.. ci sono un'infinità di parametri mancanti di cui molti probabilmente solo loro sanno cosa vogliono dire :) ma aticonfig --initial ti da qualche errore?

No nessun errore, per sicurezza ho rifatto un'altra volta l'installazione dei drivers e in effetti fila tutto liscio solo che l'accelerazione non si abilita, l'unica cosa "strana" è che al comando fgl_glxgears le rotelle non appaiono, forse vanno solo in direct rendering?

beppegrillo

27-04-2006, 18:12

No nessun errore, per sicurezza ho rifatto un'altra volta l'installazione dei drivers e in effetti fila tutto liscio solo che l'accelerazione non si abilita, l'unica cosa "strana" è che al comando fgl_glxgears le rotelle non appaiono, forse vanno solo in direct rendering?
dacci un dmesg ed un cat /var/log/Xorg*

-Slash

27-04-2006, 22:24

li ho provati ad installare prima dal file eseguibile e non mi va perchè mi dice devo specificare una versione di xorg inferiore a 6.9, ma anche specificandola non funziona e da lo stesso errore.

poi ho provato a seguire questo (http://wiki.cchtml.com/index.php/Ubuntu_Dapper_Installation_Guide#Method_2:_Generating.2FInstalling_Ubuntu_packages_for_the_newer_8.24.8_drivers_in_Ubuntu_Dapper) tutorial come avevo letto in questo (http://www.hwupgrade.it/forum/showthread.php?t=1179956&page=2&pp=20) topic ma al riavvio non mi partiva neanche il server x ed ho dovuto cancellare manualmente parecchie parti di xorg.conf visto che furbescamente non ne avevo fatto un backup.

in poche parole come devo fare per installarli semplicemente sti driver?? ho debian etch aggiornata a sid
tra l'altro non ho mai installato i driver precedenti a questi e mi servirebbero per attivare a quanto ho capito ombre e trasparenze in kde, visto che se ora lo faccio va lentissimo e crasha tutto :doh:

sanford

27-04-2006, 22:30

DMESG:

Linux version 2.6.12-12mdk (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5
mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fb940
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa8e0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
I/O APIC #2 Version 3 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: auto BOOT_IMAGE=linux root=301 acpi=ht resume=/dev/hda5 spl
ash=silent
bootsplash: silent mode.
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2171.588 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514660k/524224k available (2348k kernel code, 9004k reserved, 717k data,
268k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4292.60 BogoMIPS (lpj=2146304)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 0
0000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 343k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router default [1106/3177] at 0000:00:11.0
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.2[C] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:11.1[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:11.5[C] -> IRQ 22
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1146179866.224:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 3750k, total 1638
4k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:57f8
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 34430 byt
es,<6>...found (800x600, 34382 bytes, v3).
Console: switching to colour frame buffer device 93x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 6
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: MAXTOR 6L020J1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R5002, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40132503 sectors (20547 MB) w/1819KiB Cache, CHS=39813/16/63, UDMA(133)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
swsusp: Suspend partition has wrong signature?
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
ahc_pci:0:8:0: Host Adapter Bios disabled. Using default SCSI device parameters
input: AT Translated Set 2 keyboard on isa0060/serio0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

input: PS2++ Logitech Wheel Mouse on isa0060/serio1
Vendor: UMAX Model: Astra 610S Rev: V1.3
Type: Scanner ANSI SCSI revision: 02
target0:0:2: Beginning Domain Validation
target0:0:2: Ending Domain Validation
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 268k freed
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 6
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 5
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
usb 1-1: new full speed USB device using uhci_hcd and address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 21, io mem 0xdfffed00
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ts: Compaq touchscreen protocol output
usb 4-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: USB disconnect, address 2
Initializing USB Mass Storage driver...
usb 1-2: new full speed USB device using uhci_hcd and address 3
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: not running at top speed; connect to a high speed hub
usb 1-2.1: new low speed USB device using uhci_hcd and address 4
EXT3 FS on hda1, internal journal
usb 1-2.2: new full speed USB device using uhci_hcd and address 5
Adding 2064312k swap on /dev/hda5. Priority:-1 extents:1
usb 1-2.4: new full speed USB device using uhci_hcd and address 6
usb 1-2.4: not running at top speed; connect to a high speed hub
usbcore: registered new driver xpad
drivers/usb/input/xpad-core.c: driver for Xbox controllers with mouse emulation
v0.1.4
usbcore: registered new driver hiddev
hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone
] on usb-0000:00:10.1-1
input: USB HID v1.00 Joystick [GreenAsia Inc. ] on usb-0000:00:10.0-2.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
saa7146: found saa7146 @ mem e0ee0e00 (revision 1, irq 17) (0x13c2,0x0000).
dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw
dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware
dvb-ttpci: and can be downloaded here http://www.linuxtv.org/download/dvb/firmwa
re/
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
Supermount version 2.0.4 for kernel 2.6
loop: loaded (max 8 devices)
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 260 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
Vendor: Model: USB DRIVE Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1024000 512-byte hdwr sectors (524 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 1024000 512-byte hdwr sectors (524 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 260 bytes per conntrack
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/proje
cts/ipt_recent/
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=5 option
and report if it works on your machine.
For more details, read ALSA-Configuration.txt.
PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 6
PCI: Setting latency timer of device 0000:00:11.5 to 64
usbcore: registered new driver snd-usb-audio
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c5760(lo)
IPv6 over IPv4 tunneling driver
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b
ytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b
ytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b
ytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b
ytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b ytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b ytes, v3).
bootsplash: status on console 5 changed to on
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Shorewall:net2all:DROP:IN=ppp0 OUT= MAC= SRC=68.74.30.79 DST=151.38.72.104 LEN=4 8 TOS=0x00 PREC=0x00 TTL=112 ID=21353 DF PROTO=TCP SPT=1539 DPT=32775 WINDOW=642 40 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=ppp0 OUT= MAC= SRC=68.74.30.79 DST=151.38.72.104 LEN=4 7 TOS=0x00 PREC=0x00 TTL=113 ID=21354 PROTO=UDP SPT=40062 DPT=32775 LEN=27
Shorewall:net2all:DROP:IN=ppp0 OUT= MAC= SRC=68.74.30.79 DST=151.38.72.104 LEN=4 8 TOS=0x00 PREC=0x00 TTL=112 ID=21356 DF PROTO=TCP SPT=1539 DPT=32775 WINDOW=642 40 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=ppp0 OUT= MAC= SRC=68.74.30.79 DST=151.38.72.104 LEN=4 8 TOS=0x00 PREC=0x00 TTL=112 ID=21357 DF PROTO=TCP SPT=1539 DPT=32775 WINDOW=642 40 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=ppp0 OUT= MAC= SRC=204.16.208.59 DST=151.38.72.104 LEN =388 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=UDP SPT=37861 DPT=1026 LEN=368

sanford

27-04-2006, 22:37

CAT /VAR/LOG/XORG*:

drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card209
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card210
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card211
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card212
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card213
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card214
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card215
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card216
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card217
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card218
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card219
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card220
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card221
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card222
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card223
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card224
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card225
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card226
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card227
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card228
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card229
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card230
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card231
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card232
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card233
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card234
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card235
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card236
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card237
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card238
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card239
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card240
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card241
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card242
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card243
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card244
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card245
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card246
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card247
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card248
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card249
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card250
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card251
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card252
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card253
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card254
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) RADEON(0): [drm] drmOpen failed
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7161
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/X11R6/lib/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "XkbOptions" "compose:rwin"
(**) Keyboard1: XkbOptions: "compose:rwin"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 11
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) Mouse1: ps2EnableDataReporting: succeeded

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.6.3-29mdk-i686-up-4GB i686 [ELF]
Current Operating System: Linux localhost 2.6.12-12mdk #1 Fri Sep 9 18:15:22 CEST 2005 i686
Build Date: 13 March 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.9.log", Time: Tue Apr 25 16:19:44 2006
(++) Using config file: "/etc/X11/XF86Config.test"
(==) ServerLayout "layout1"
(**) |-->Screen "aticonfig Screen 0" (0)
(**) | |-->Monitor "aticonfig Monitor 0"
(**) | |-->Device "ATI Graphics Adapter 0"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(**) Option "XkbOptions" "compose:rwin"
(**) XKB: options: "compose:rwin"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(WW) Open ACPI failed (/proc/acpi/event) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
Using vt 8
(--) using VT number 8

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:08:0: chip 9004,5078 card 9004,7850 rev 03 class 01,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1131,7146 card 13c2,0000 rev 01 class 04,80,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,4720 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,1002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,1003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xbfc00000 - 0xdfcfffff (0x20100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xd0000000/27, 0xdfef0000/16, I/O @ 0xc800/8, BIOS @ 0xdfec0000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xc8000000/27, 0xdfee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfffed00 - 0xdfffedff (0x100) MX[B]
[1] -1 0 0xdfffee00 - 0xdfffefff (0x200) MX[B]
[2] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[5] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[6] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[7] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[12] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[13] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfffed00 - 0xdfffedff (0x100) MX[B]
[1] -1 0 0xdfffee00 - 0xdfffefff (0x200) MX[B]
[2] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[5] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[6] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[7] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[12] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[13] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffed00 - 0xdfffedff (0x100) MX[B]
[6] -1 0 0xdfffee00 - 0xdfffefff (0x200) MX[B]
[7] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[12] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[19] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[21] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
[22] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.9.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) v4l driver for Video4Linux
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9000 (RV280 5962),
RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61),
MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148),
RADEON 8500 (R200 514C), RADEON 9100 (R200 514D),
RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150),
RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152),
RADEON 9600 (RV350 4E51), MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460),
MOBILITY RADEON X300 (M22 5461), MOBILITY RADEON X600 (M24 5462),
MOBILITY FireGL V3100 (M22 5464), RADEON X600 (RV380 3E50),
FireGL V3200 (RV380 3E54), MOBILITY RADEON X600 (M24 3150),
MOBILITY RADEON X300 (M22 3152), MOBILITY FireGL V3200 (M24 3154),
RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49),
RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B),
RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D),
MOBILITY RADEON 9800 (M18 4A4E), RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), RADEON X850 XT (R480 5D52),
RADEON X850 (R481 4B48), RADEON X850 XT (R481 4B49),
RADEON X850 SE (R481 4B4A), RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 (M58 7101),
MOBILITY RADEON X1800 (M58 7102), RADEON X1800 XT (R520 7108),
RADEON X1800 PRO (R520 7109), RADEON X1800 SE (R520 710A),
RADEON X1800 (R520 710B), RADEON X1800 (R520 710C),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1300 XT (RV515 7140), RADEON X1300 PRO (RV515 7142),
MOBILITY RADEON X1400 (M54 7145), RADEON X1300 LE (RV515 7146),
MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A),
RADEON X1300 SE (RV515 714E), RADEON X1300 VE (RV515 715E),
RADEON X1900 (R580 7240), RADEON X1900 (R580 7243),
RADEON X1900 (R580 7244), RADEON X1900 (R580 7245),
RADEON X1900 (R580 7246), RADEON X1900 (R580 7247),
RADEON X1900 (R580 7248), RADEON X1900 (R580 7249),
RADEON X1900 (R580 724A), RADEON X1900 (R580 724B),
RADEON X1900 (R580 724C), RADEON X1900 (R580 724D),
RADEON X1900 (R580 724E), RADEON X1900 (R580 724F),
RADEON X1600 XT (RV530 71C0), RADEON X1600 PRO (RV530 71C2),
MOBILITY RADEON X1600 (M56 71C5), RADEON (RV530 LE 71C6),
RADEON (RV530 VE 71CE), RADEON (RV530 SE 71DE)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.24.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.24g1
(II) ATI Proprietary Linux Driver Build Date: Apr 11 2006 13:36:57
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.24.1-driver-lnx-259766
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9800 PRO (R350 4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffed00 - 0xdfffedff (0x100) MX[B]
[6] -1 0 0xdfffee00 - 0xdfffefff (0x200) MX[B]
[7] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[12] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[19] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[21] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
[22] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x8228900
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffed00 - 0xdfffedff (0x100) MX[B]
[6] -1 0 0xdfffee00 - 0xdfffefff (0x200) MX[B]
[7] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[12] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
[25] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO (R350 4E48)" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x1002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R350
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/X11R6/lib/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
ABI class: X.Org Server Extension, version 0.2
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM Model: 4a5d Serial#: 2850
(II) fglrx(0): Year: 2002 Week: 4
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate Composite
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.91
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.625 redY: 0.326 greenX: 0.285 greenY: 0.593
(II) fglrx(0): blueX: 0.142 blueY: 0.071 whiteX: 0.282 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 720x400@88Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@87Hz (interlaced)
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 157.5 MHz Image Size: 350 x 262 mm
(II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 200 MHz
(II) fglrx(0): Monitor name: FLATRON 995FT
(II) fglrx(0): Monitor name: Plus
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 49 modes found for primary display.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Mode "1600x1200": 202.5 MHz (scaled from 0.0 MHz), 93.8 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072
(**) fglrx(0): Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz
(II) fglrx(0): Modeline "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 +hsync
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.61 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): Default mode "800x600": 84.0 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz
(II) fglrx(0): Modeline "800x600" 83.95 800 856 944 1088 600 601 604 643 +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.18 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 72.8 MHz (scaled from 0.0 MHz), 84.3 kHz, 160.0 Hz
(II) fglrx(0): Modeline "640x480" 72.85 640 680 752 864 480 481 484 527 +hsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.41 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 150 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 150 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 120 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 120 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 100 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 100 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (112, 112)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/X11R6/lib/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): cpuSpeedMHz: 0x0000087c
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdfffed00 - 0xdfffedff (0x100) MX[B]
[8] -1 0 0xdfffee00 - 0xdfffefff (0x200) MX[B]
[9] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[11] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[12] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[13] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[14] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] 0 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[23] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[24] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[25] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[26] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[27] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
[28] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area: 0xd0954000 (size=0x076ac000)
(II) fglrx(0): UMM area: 0xd0954000 (size=0x076ac000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xd0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 1200)
(II) fglrx(0): Largest offscreen area available: 1600 x 6988
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "XkbOptions" "compose:rwin"
(**) Keyboard1: XkbOptions: "compose:rwin"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 11
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) Mouse1: ps2EnableDataReporting: succeeded

-Slash

28-04-2006, 11:05

mr_hyde

28-04-2006, 15:55

Uhm, neituoi log non ho visto qualcosa che invece mi aspetterei di vedere...

Fai cosi':
0) controlla i diritti di /dev/dri (e di tutto cio' che e' contenuto in /dev/dri),
la drectory dovrebbe essere 777,il contenuto "c rw rw rw"

1) quando sei ancora in modalita' "solo-testo" su una shell digita

tail -f /var/log/messages

vedrai che ti apparirano alcune righe (per la precisione le ultime di /var/log/messages) e che NON ti verra' restituito il prompt.

Batti qualche volta ENTER per lasciare qualche riga vuota

2) su un'altra shell lancia X
A questo punto, nella shell del tail dovrebbero comparire nuove scritte: copia, incolla e postale qui.

Per interrompere il tail basta che digiti CTRL+C

3) dopo che hai provato a far partire X fai "lsmod": vedi tra i moduli "fglrx"?

4) vai in /lib/modules/fglrx

5)
cd build_mod
cd 2.6.x
make clean
cd ../firegl_agpgart
make clean
cd ..
./make.sh (se non e' eseguibile allora "sh make.sh")

CONTROLLA ATTENTAMENTE GLI ERRORI PRODOTTI!
Eventualmente postali (mi sa che ti manca qualche patch)

Se invece hai solo una montagna di warning:
cd ..
./make_install.sh (se non e'eseguibile allora "sh make_install.sh")

Rifai il boot e riprova a caricare X.

Ciao,
Mr Hyde

sanford

28-04-2006, 17:29

Senza provare tutta la pappardella, la directory /dev/dri è vuota...ora che si fa?

zephyr83

28-04-2006, 21:38

sono riuscito ad installarla con l'eseguibile della ati, ma mi dice che devo eseguire aticonfig per configurare la scheda. se faccio aticonfig pero mi da le istruzioni del comando e non parte niente :muro:

EDIT: ho capito come fare ma niente, mi da sempre lo stesso errore nel caricamento del server x:

failed to load module fglrx insieme con le informazioni sul mio computer :mad:

ma perchè non ho preso una nvidia :rolleyes:

Avevo lo stesso problema anche io su simplymepis e nn capivo perché, ho provato mille volte a installare i driver ma niente. Alla fine ho reinstallato mepis (meno di 20 minuti) scegliendo da subito i driver fglrx (c'è l'opzione) e ho risolto il problema!! Rimane cmq un mistero!!!

mr_hyde

28-04-2006, 23:23

Senza provare tutta la pappardella, la directory /dev/dri è vuota...ora che si fa?

A questo punto sospetto fortemente che sia fallita la creazione del modulo fglrx.
Se fai "lsmod" lo vedi?

Credo che per te possa essere utile anche dare un occhio alla discussione

http://www.hwupgrade.it/forum/showthread.php?t=1155884

Ciao,
Mr Hyde

zephyr83

29-04-2006, 00:52

Consiglio di installare i driver dalla consolle e vedere se alla fine parti di eventuali errori. Ho notato che così se ci sn errori me lo dice, se lo isntallato dall'interfaccia grafica invece niente

-Slash

29-04-2006, 12:17

Avevo lo stesso problema anche io su simplymepis e nn capivo perché, ho provato mille volte a installare i driver ma niente. Alla fine ho reinstallato mepis (meno di 20 minuti) scegliendo da subito i driver fglrx (c'è l'opzione) e ho risolto il problema!! Rimane cmq un mistero!!!
io non posso reinstallarlo perchè con molta fatica ho installato parecchie cose e comunque nell'installazione di debian(netinstall) non mi semra di aver visto quell'opzione...

comunque ho provato di tutto, a partire dal sostituire il nome del modulo o con ati o con radeon ma niente, cosi parte ma dando un fglrxinfo mi da come driver i soliti

debian:/home/slash# fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)

poi ho provato invece a caricare il modulo manualmente facendo:

debian:/home/slash# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.16-1-486/kernel/drivers/char/drm/fglrx.ko): No such device

ho cercato questo errore ma non ho trovato neanche uno straccio di soluzione...

quindi ovviamente siccome non carica il modulo, mi da errore quando deve caricare lo startx...

failed to load module fglrx

per piacere aiutatemi non so piu che fare :help:

mr_hyde

29-04-2006, 12:30

Innanzitutto ti ri-invito a leggere il thread indicato sopra, li c'e' scritto cosa ho fatto io passo per passo per usare gli ultimi driver (8.24.8).

Ad ogni modo andiamo con ordine e ri-iniziamo a fare i controlli base.
Come prima cosa, visto anche l'errore, hai nel kernel che usi i moduli AGP e DMR?
Dovresti controllare se in /proc/config.gz compaiono stringhe del tipo

CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m

Ciao,
Mr Hyde

-Slash

29-04-2006, 13:31

-Slash

01-05-2006, 09:43

Significa che non c'è abilitata nel kernel la possibilità di vedere il config da /proc/config.gz

Prova a vedere se in /boot hai qualche file config-2.*.*
si ne ho due, uno relativo al mio vecchio kernel e uno al nuovo(il piu recente) :D

che devo fare per farli funzionare sti caspita di driver? :(

mr_hyde

01-05-2006, 17:14

Fai un "less config-versione-kernel-che-stai-usando" e controlla se ci sono le opzioni che ho elencato nel precedente post.

-Slash

01-05-2006, 17:22

si c'è...

CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m

mr_hyde

01-05-2006, 19:18

OK, adesso:

1) digita "mount" e controlla se ti appare la riga

tmpfs on /dev/shm type tmpfs (rw)

2) vai in /lib/modules/fglrx (questa directory dovresti averla dopo l'installazione dei driver ATI)

- vai in build_mod/2.6.x
- digita "make clean"
- quindi "cd ../firegl_agpgart"
- digita "make clean"
- "cd .."
- "./make.sh"

ATTENZIONE: questo e' il comando che "costruisce" il modulo fglrx da caricare.
Per costruire il modulo devi avere intallati i sorgenti del kernel che stai usando.
Questo punto potrebbe fallire: con i kernel recenti infatti i sorgneti di questi moduli vanno patchati (ti invito per l'ennesima volta a leggere il famoso post che ho linkato qualche messaggio fa, se ancora non lo avessi fatto). Preoccupati solo degli errori: e' normale che la compilazione di dia una montagna di warning.

- se non hai errori:
cd ..
./make_install.sh

A questo punto hai installato i moduli. Ma devi anche preoccuparti del file di configurazione di X.
Supponendo che sia in /etc/X11 per prima cosa fai una copia di sicurezza di quello attuale:

cd /etc/X11
cp xorg.conf xorg.conf.SICUREZZA

ed ora usa il programmino di ATI "aticonfig" per modificare il tuo xorg.conf in modo da abilitare i driver di ATI. Per fare questo:

aticonfig --initial

Poi, vai ad editare il file /etc/X11/xorg.conf. Se gia' non ci fosse aggiungi la sezione:

Section "DRI"
Mode 0666
EndSection

ATTENTO: potrebbero anche esserci righe di commento che io non ho riportato.

Questa sezione serve per far si' che l'uso del DRI sia per tutti gli utenti.

Salva quindi xorg.conf e prova un reboot e poi a far partire X.

Intanto fai queste prove.

Ciao,
Mr Hyde

-Slash

01-05-2006, 22:24

mi si blocca sempre al make install :(

ecco quello che ho fatto, è andato tutto bene fino a li dove è apparso il solito errore

debian:/home/elendil# mount
/dev/hda1 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev type tmpfs (rw,size=10M,mode=0755)
debian:/home/elendil# cd /lib/modules/fglrx
debian:/lib/modules/fglrx# cd build_mod
debian:/lib/modules/fglrx/build_mod# cd 2.6.x
debian:/lib/modules/fglrx/build_mod/2.6.x# make clean
rm -f *.c *.h *.o *.ko *.GCC* .??*
debian:/lib/modules/fglrx/build_mod# cd firegl_agpgart
debian:/lib/modules/fglrx/build_mod/firegl_agpgart# make clean
rm -f *.o *.ko *.GCC* .??*
debian:/lib/modules/fglrx/build_mod/firegl_agpgart# cd ..
debian:/lib/modules/fglrx/build_mod# ./make.sh
ATI module generator V 2.0
==========================
initializing...
cleaning...
patching 'highmem.h'...
assuming new VMA API since we do have kernel 2.6.x...
doing Makefile based build for kernel 2.6.x and higher
make -C /lib/modules/2.6.16-1-486/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.16-1-486'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/agp3.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/nvidia-agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/agpgart_be.o
/lib/modules/fglrx/build_mod/2.6.x/agpgart_be.c: In function ‘__fgl_agp_init’:
/lib/modules/fglrx/build_mod/2.6.x/agpgart_be.c:8175: warning: ‘pm_register’ is deprecated (declared at include/linux/pm_legacy.h:16)
/lib/modules/fglrx/build_mod/2.6.x/agpgart_be.c: In function ‘__fgl_agp_cleanup’:
/lib/modules/fglrx/build_mod/2.6.x/agpgart_be.c:8185: warning: ‘pm_unregister_all’ is deprecated (declared at include/linux/pm_legacy.h:26)
/lib/modules/fglrx/build_mod/2.6.x/agpgart_be.c: At top level:
/lib/modules/fglrx/build_mod/2.6.x/agpgart_be.c:6079: warning: ‘ati_gart_base’ defined but not used
CC [M] /lib/modules/fglrx/build_mod/2.6.x/i7505-agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
In file included from /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:162:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.h:274:5: warning: "FIREGL_VMA_INFO" is not defined
In file included from /lib/modules/fglrx/build_mod/2.6.x/drm_proc.h:41,
from /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:333:
/lib/modules/fglrx/build_mod/2.6.x/drmP.h:561:5: warning: "__HAVE_VBL_IRQ" is not defined
/lib/modules/fglrx/build_mod/2.6.x/drmP.h:664:5: warning: "__HAVE_VBL_IRQ" is not defined
/lib/modules/fglrx/build_mod/2.6.x/drmP.h:936:5: warning: "__HAVE_SG" is not defined
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:407:5: warning: "FIREGL_VMA_INFO" is not defined
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:426:5: warning: "FIREGL_VMA_INFO" is not defined
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘firegl_stub_putminor’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:581: warning: ‘inter_module_put’ is deprecated (declared at include/linux/module.h:575)
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:583: warning: ‘inter_module_unregister’ is deprecated (declared at include/linux/module.h:572)
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘firegl_stub_register’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:603: warning: ‘inter_module_register’ is deprecated (declared at include/linux/module.h:571)
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:634: warning: ‘inter_module_put’ is deprecated (declared at include/linux/module.h:575)
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: At top level:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3592: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3593: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3594: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3595: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3596: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3597: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3598: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3599: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3601: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3611: warning: function declaration isn’t a prototype
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘test_inter_module_interface’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3677: warning: ‘inter_module_put’ is deprecated (declared at include/linux/module.h:575)
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3683: warning: ‘inter_module_put’ is deprecated (declared at include/linux/module.h:575)
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘__ke_agp_allocate_memory_phys_list’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3941: warning: passing argument 3 of ‘im_fglrx_agp_stub->allocate_memory_phys_list’ makes integer from pointer without a cast
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘__ke_agp_bind_memory’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3980: warning: passing argument 1 of ‘im_fglrx_agp_stub->bind_memory’ from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘__ke_agp_unbind_memory’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3993: warning: passing argument 1 of ‘im_fglrx_agp_stub->unbind_memory’ from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘__ke_smp_call_function’:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4222: warning: statement with no effect
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: At top level:
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2256: warning: ‘deferred_flush’ defined but not used
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.16-1-486'
build succeeded with return value 0
compiling fglrx_agp.ko module
make -C /lib/modules/2.6.16-1-486/build SUBDIRS=/lib/modules/fglrx/build_mod/firegl_agpgart modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.16-1-486'
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/backend.o
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrapper.h:31,
from /lib/modules/fglrx/build_mod/firegl_agpgart/backend.c:30:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.h:176:5: warning: "LINUX_VERSION_CODE" is not defined
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c: In function ‘agp_backend_initialize’:
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c:191: warning: passing argument 1 of ‘bridge->driver->agp_destroy_page’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c: In function ‘agp_backend_cleanup’:
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c:216: warning: passing argument 1 of ‘__ke_phys_to_virt’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c:216: warning: passing argument 1 of ‘bridge->driver->agp_destroy_page’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c: At top level:
/lib/modules/fglrx/build_mod/firegl_agpgart/backend.c:294: warning: ‘agp_init’ defined but not used
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/generic.o
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/agp.h:32,
from /lib/modules/fglrx/build_mod/firegl_agpgart/generic.c:43:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.h:759:1: warning: "PCI_DEVICE_ID_INTEL_ICH7_1" redefined
In file included from include/linux/pci.h:26,
from /lib/modules/fglrx/build_mod/firegl_agpgart/generic.c:34:
include/linux/pci_ids.h:2104:1: warning: this is the location of the previous definition
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/isoch.o
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/agp.h:32,
from /lib/modules/fglrx/build_mod/firegl_agpgart/isoch.c:10:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.h:759:1: warning: "PCI_DEVICE_ID_INTEL_ICH7_1" redefined
In file included from include/linux/pci.h:26,
from /lib/modules/fglrx/build_mod/firegl_agpgart/isoch.c:6:
include/linux/pci_ids.h:2104:1: warning: this is the location of the previous definition
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.o
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrapper.h:31,
from /lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:14:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.h:176:5: warning: "LINUX_VERSION_CODE" is not defined
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘intel_i810_cleanup’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:158: warning: passing argument 1 of ‘__ke_iounmap’ discards qualifiers from pointer target type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘intel_i810_free_by_type’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:348: warning: passing argument 1 of ‘__ke_phys_to_virt’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:348: warning: passing argument 1 of ‘i8xx_destroy_pages’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:351: warning: passing argument 1 of ‘__ke_phys_to_virt’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:351: warning: passing argument 1 of ‘agp_bridge->driver->agp_destroy_page’ makes pointer from integer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:354: warning: implicit declaration of function ‘kfree’
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘intel_i830_cleanup’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:564: warning: passing argument 1 of ‘__ke_iounmap’ discards qualifiers from pointer target type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘intel_i915_cleanup’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:670: warning: passing argument 1 of ‘__ke_iounmap’ discards qualifiers from pointer target type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:671: warning: passing argument 1 of ‘__ke_iounmap’ discards qualifiers from pointer target type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘find_i830’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1526: warning: assignment from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1528: warning: assignment from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘agp_intel_probe’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1697: warning: implicit declaration of function ‘pci_assign_resource’
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘agp_intel_remove’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1734: warning: passing argument 1 of ‘__ke_pci_get_drvdata’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘agp_intel_resume’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1742: warning: passing argument 1 of ‘__ke_pci_get_drvdata’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1744:5: warning: "__ke_LINUX_VERSION_CODE" is not defined
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: At top level:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1814: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1815: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘fgl_agp_intel_init’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1827: warning: passing argument 1 of ‘__fgl_pci_module_init’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘fgl_agp_intel_cleanup’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:1834: warning: passing argument 1 of ‘__fgl_pci_unregister_driver’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c: In function ‘alloc_agpphysmem_i8xx’:
/lib/modules/fglrx/build_mod/firegl_agpgart/intel-agp.c:189: warning: ‘page’ is used uninitialized in this function
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.o
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrapper.h:31,
from /lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:6:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.h:176:5: warning: "LINUX_VERSION_CODE" is not defined
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c: In function ‘agp_ali_probe’:
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:303: warning: passing argument 1 of ‘__ke_pci_find_capability’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:331: warning: passing argument 1 of ‘__ke_pci_read_config_byte’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:363: warning: passing argument 1 of ‘__ke_pci_read_config_dword’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:367: warning: passing argument 1 of ‘__ke_pci_set_drvdata’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c: In function ‘agp_ali_remove’:
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:373: warning: passing argument 1 of ‘__ke_pci_get_drvdata’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c: At top level:
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:396: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:397: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c: In function ‘fgl_agp_ali_init’:
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:403: warning: passing argument 1 of ‘__fgl_pci_module_init’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c: In function ‘fgl_agp_ali_cleanup’:
/lib/modules/fglrx/build_mod/firegl_agpgart/ali-agp.c:408: warning: passing argument 1 of ‘__fgl_pci_unregister_driver’ from incompatible pointer type
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.o
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:113:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.h:759:1: warning: "PCI_DEVICE_ID_INTEL_ICH7_1" redefined
In file included from include/linux/pci.h:26,
from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:74:
include/linux/pci_ids.h:2104:1: warning: this is the location of the previous definition
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c: In function ‘__ke_phys_to_virt’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:660: warning: passing argument 1 of ‘phys_to_virt’ makes integer from pointer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:660: warning: return makes integer from pointer without a cast
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c: In function ‘__ke_verify_area’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:1123: warning: implicit declaration of function ‘verify_area’
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c: In function ‘__ke_get_vm_phys_addr’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:1362: warning: passing argument 1 of ‘pmd_offset’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c: In function ‘__ke_vm_phys_addr_str’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:1818: warning: passing argument 1 of ‘pmd_offset’ from incompatible pointer type
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c: In function ‘__ke_smp_call_function’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:2252: warning: statement with no effect
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c: At top level:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:333: warning: ‘firegl_stub_list’ defined but not used
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_wrap.c:1475: warning: ‘deferred_flush’ defined but not used
CC [M] /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.o
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:2:1: warning: "/*" within comment
In file included from /lib/modules/fglrx/build_mod/firegl_agpgart/agp.h:32,
from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:28:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.h:759:1: warning: "PCI_DEVICE_ID_INTEL_ICH7_1" redefined
In file included from include/linux/pci.h:26,
from /lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:17:
include/linux/pci_ids.h:2104:1: warning: this is the location of the previous definition
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c: In function ‘firegl_agp_init’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:301: warning: ‘inter_module_register’ is deprecated (declared at include/linux/module.h:571)
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:302: warning: ‘inter_module_register’ is deprecated (declared at include/linux/module.h:571)
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c: In function ‘firegl_agp_exit’:
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:327: warning: ‘inter_module_unregister’ is deprecated (declared at include/linux/module.h:572)
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:328: warning: ‘inter_module_unregister’ is deprecated (declared at include/linux/module.h:572)
/lib/modules/fglrx/build_mod/firegl_agpgart/firegl_agp.c:332: warning: ‘inter_module_put’ is deprecated (declared at include/linux/module.h:575)
LD [M] /lib/modules/fglrx/build_mod/firegl_agpgart/fglrx_agp.o
Building modules, stage 2.
MODPOST
*** Warning: "verify_area" [/lib/modules/fglrx/build_mod/firegl_agpgart/fglrx_agp.ko] undefined!
CC /lib/modules/fglrx/build_mod/firegl_agpgart/fglrx_agp.mod.o
LD [M] /lib/modules/fglrx/build_mod/firegl_agpgart/fglrx_agp.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.16-1-486'
AGPGART build succeeded with return value 0
finished compiling for fglrx_agp
duplicating results into driver repository...
done.
==============================
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================
debian:/lib/modules/fglrx/build_mod# cd ..
debian:/lib/modules/fglrx# ./make_install.sh
- creating symlink
- recreating module dependency list
- trying a sample load of the kernel modules
FATAL: Error inserting fglrx (/lib/modules/2.6.16-1-486/kernel/drivers/char/drm/fglrx.ko): No such device
failed.
debian:/lib/modules/fglrx#

mr_hyde

02-05-2006, 09:03

Ora sono al lavoro quindi non posso controllare, tuttavia non ricordavo COSI' TANTI warning riguardanti l'AGP.

Per quanto riguarda questi controlla se, per qualche assurdo motivo, tu non abbia DISABILITATI nel kernel le parti che riguardano l'AGP: solito modo: guarda nel file /boot/config-versione-kernel come sono le stringhe che contengono la scritta "AGP", dovresti avere qualcosa di simile:

CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m

Ad ogni modo SICURAMENTE ti mancano un po' di patch sui sorgenti presenti in /lib/modules/fglrx, quello veramente importante riguarda la sostituzione di "verify_area" con "access_ok", questo potrebbe far si' che per il tuo sistema risulti impossibile caricare correttamente fglrx!
Mi spiace dirti pero' che al momento non ho con me la mia installazione, quindi non posso dirti esattamente quale sia il file in cui fare la modifica (mi sembra build_mod/firegl_agp/firegl_wrap.c) e come (mi sembra sostituzione di "verify_area" con "access_ok").

Ciao,
Mr Hyde

-Slash

02-05-2006, 15:14

niente, non va neanche cosi :muro:
puo darsi che la mia scheda video non sia supportata...
mi pare di ricordare che è una ati mobility radeon igp ma non ricordo che numero...
come posso vedere con precisione che scheda è? dubito pero sia questo perchè il portatile non è vecchissimo(meno di due anni).

altrimenti potrei provare ad installare i vecchi driver, meglio di niente...

mr_hyde

02-05-2006, 16:25

Uhm... per la versione della scheda non credo: io quella procedura l'ho usata recentemente per un vecchio portatile con ATI Mobility 9200 (e per il mio che ha una mobility x700).

Ci sono ancora un paio di variabili di ambiente (ci cui pero' non ricordo i nomi) che possono avere influenza ed anche un conflitto con le librerie Mesa (queste ultime pero' non dovrebbero causare l'errore che hai tu ma solo la mancanza del reale utilizzo dei driver accelerati di ATI).

Appena possibile ti scrivo qualcosa di piu'.

Ciao,
Mr Hyde

-Slash

02-05-2006, 21:56

mr_hyde

02-05-2006, 22:33

Allora, le variabili di mbiente sono:

LIBGL_DRIVERS_PATH che deve contenere la directory dove sono i file

fglrx_dri.so
atiogl_a_dri.so
linux/libfglrxdrm.so

Nella mia distribuzione, che e' a 64 bit, e' impostata come:

root@krypto:~# echo $LIBGL_DRIVERS_PATH
/usr/X11R6/lib64/modules/dri/:/usr/X11R6/lib/modules/dri

e poi

LD_LIBRARY_PATH

che deve contenere le direcotry dove sono memorizzati

libGL.so.*
libaticonfig.a
libfglrx_*.*

Nella mia SLAMD ho:

echo $LD_LIBRARY_PATH
/usr/lib64:/usr/X11R6/lib64:/usr/local/lib64:/usr/lib:/usr/X11R6/lib:/usr/local/lib:/usr/X11R6/lib64:/usr/X11R6/lib

Puoi inoltre vedere cosa ha installato/tentato di installare il rpogramma di ATI guardando la directory

/usr/share/fglrx

Ad esempio, nel file "drv.list" c'e' l'elenco dei file che sono stati installati.
Interessante e' anche il file "fglrx-install.log" che mostra gli errori che ci sono stati nella prima installazione.

Per la domanda sulle versioni precedenti: anche la versione precedente ha lo stesso tipo di installazione. Secondo me ti conviene al max cercare con google una guida specifica per la tua distribuzione.

Ciao,
Mr Hyde

-Slash

06-05-2006, 15:40

allora...

slash@debian:~$ echo $LIBGL_DRIVERS_PATH
/usr/lib/xorg/modules/dri:/usr/X11R6/lib/modules/dri/

slash@debian:~$ echo $LD_LIBRARY_PATH
/usr/lib:/usr/X11R6/lib

la prima directory della prima variabile non esiste nel mio computer, nella seconda sono contenuti i seguenti file

slash@debian:/usr/X11R6/lib/modules/dri$ ls
atiogl_a_dri.so i810_dri.so mga_dri.so r200_dri.so sis_dri.so
fglrx_dri.so i915_dri.so r128_dri.so radeon_dri.so tdfx_dri.so

quindi manca il terzo che hai detto.

nella seconda variabile invece sono contenuti due dei tre file nella prima directory e 3 su 3 nella seconda(se il terzo file a cui ti riferisci è libfglrx_dm.a o libfglrx_dm.so.1.0, visto che non so se ho capito bene)

scusa se ho risposto tardi ma ho avuto parecchio da fare in questi giorni :D

EDIT: alla fine del log che mi hai detto c'è scritto
[Error] Kernel Module : Failed to install compiled kernel module - please consult readme.

mr_hyde

06-05-2006, 20:35

[QUOTE=-Slash]allora...

slash@debian:~$ echo $LIBGL_DRIVERS_PATH

Uhm... Se ho capito bene hai Debian.

In questo caso forse ti puo' essere utile anche il link

http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html

Qui si fa menzione del fatto che libGL e' stata spostata.

Vedi te se quello che c'e' su quel sito puo' essere utile...

Ciao,
Mr Hyde

char6676

08-05-2006, 20:47

-Slash

08-05-2006, 21:24

Ciao a tutti, è da gg che sto tentanto di installare con successo i driver ati per debian....visto che c'ero all'inizio ho fatto na ricerca con synaptic e ho trovato i driver ati per la mia distro (debian unstable) , sl che poco prima di scaricarli mi dice che xserver-xorg-core deve essere maggiore di 1.0.9.9 o qlcsa di simile....che posso fare ? :D tnx :D
apt-get upgrade xserver-xorg-core ;)

comunque mr_hyde purtroppo non mastico molto bene l'inglese... magari domani provo ad aprire un topic e vedo se qualcuno con debian ha avuto il mio stesso problema :doh:

char6676

08-05-2006, 21:32

apt-get upgrade xserver-xorg-core ;)

ah devo fare upgrade, proverò , io facevo sempre install , ma giustamente apt mi diceva che ero scemo, dato che il pacchetto nn esiste :D proverò , tnx :D