Rufio7
16-02-2006, 17:03
danso un'occhiata per la rete,ed anche su questo forum,grazie agli"how to" sono riuscito ad impossessarmi di uno script chiamato "speedtouchconf.sh" il quale eseguito da root tramite shell avrebbe dovuto configurare il mio modem;
Assieme a questo script,era necessario lanciare un microcode il quale avrebbe permesso di far comunicare il modem con la centralina(penso).
Dunque,lanciando lo script"speedtouchconf" ecco cosa accade:
----------
speedtouchconf comes with ABSOLUTELY NO WARRANTY; for details type:
/home/knoppix/Desktop/speed/speedtouchconf.sh -gpl
This is free software, and you are welcome to redistribute it
under certain conditions.
See the included file COPYING for more details.
************************************************
* *
* speedtouchconf.sh by Steve Parker *
* *
* http://speedtouchconf.sourceforge.net/ *
* based on speedtouch.sourceforge.net project *
* *
************************************************
If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and /var/log/messages for diagnosis.
Linux kernel version 2.6 okay.
/home/knoppix/Desktop/speed
*******************************************
* *
* Please select your ISP Settings *
* *
*******************************************
Country/ISP VPI VCI
Belgium, ? 8 35
Denmark, Orang 8 35
France, Wanadoo 8 35
France, ? 8 67
Italy, ? 8 35
Netherlands, ? 8 48
Netherlands 0 35
Poland (NeoStrada) 0 35
UK, Any 0 38
Austria (AON) 8 48
US, BellSouth 8 35
Singapore Pacificnet 0 100
Please type your VPI VCI numbers (eg, 0 38 for UK)
8 35
Please enter your ISP Login ID (eg another@hg1.btinternet.com)
*username*
Please enter your ISP Password
*password*
Settings:
VPI / VCI : 8 / 35
Login : *username*
Password : *password*
Are these correct? (Y/N)
y
No further user interaction is required.
Configuring SpeedTouch Driver...
Software Configuration - SUCCESS
Building SpeedTouch Driver...
Software Build - SUCCESS
Installing SpeedTouch Driver...
Software Installation - SUCCESS
Creating ppp files in /etc/ppp
You can ignore any insmod hints here...
*** Configuration finished. Starting the connection ***
gio feb 16 15:15:55 CET 2006
The modem lights should start flashing for approx. 60 seconds...
You might see some messages about USBDEVFS_BULK failed - you can ignore this.
gio feb 16 15:15:55 CET 2006
The modem_run command failed (code 235)
modem_run results:
Mutex value not OK
FAILED because of modem_run error 235
root@2[knoppix]#
---------
Capisco che qualcosa non va,dato che il modem non si configura affatto..
e non riesco a lanciare il microcode..mi dice ke il comando è errato..o qlksa del genere..
Perdonatemi,ma sono un niubbo che comunque ha cercato di essere il più preciso possibile.
Qualcuno sa dirmi cosa devo fare per configurare il mio modem con knoppix(ed anceh con altre distro magari,se il procedimento è uguale)
dove ho sbaglaito?tralascio qualcosa?
Grazie.
Assieme a questo script,era necessario lanciare un microcode il quale avrebbe permesso di far comunicare il modem con la centralina(penso).
Dunque,lanciando lo script"speedtouchconf" ecco cosa accade:
----------
speedtouchconf comes with ABSOLUTELY NO WARRANTY; for details type:
/home/knoppix/Desktop/speed/speedtouchconf.sh -gpl
This is free software, and you are welcome to redistribute it
under certain conditions.
See the included file COPYING for more details.
************************************************
* *
* speedtouchconf.sh by Steve Parker *
* *
* http://speedtouchconf.sourceforge.net/ *
* based on speedtouch.sourceforge.net project *
* *
************************************************
If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and /var/log/messages for diagnosis.
Linux kernel version 2.6 okay.
/home/knoppix/Desktop/speed
*******************************************
* *
* Please select your ISP Settings *
* *
*******************************************
Country/ISP VPI VCI
Belgium, ? 8 35
Denmark, Orang 8 35
France, Wanadoo 8 35
France, ? 8 67
Italy, ? 8 35
Netherlands, ? 8 48
Netherlands 0 35
Poland (NeoStrada) 0 35
UK, Any 0 38
Austria (AON) 8 48
US, BellSouth 8 35
Singapore Pacificnet 0 100
Please type your VPI VCI numbers (eg, 0 38 for UK)
8 35
Please enter your ISP Login ID (eg another@hg1.btinternet.com)
*username*
Please enter your ISP Password
*password*
Settings:
VPI / VCI : 8 / 35
Login : *username*
Password : *password*
Are these correct? (Y/N)
y
No further user interaction is required.
Configuring SpeedTouch Driver...
Software Configuration - SUCCESS
Building SpeedTouch Driver...
Software Build - SUCCESS
Installing SpeedTouch Driver...
Software Installation - SUCCESS
Creating ppp files in /etc/ppp
You can ignore any insmod hints here...
*** Configuration finished. Starting the connection ***
gio feb 16 15:15:55 CET 2006
The modem lights should start flashing for approx. 60 seconds...
You might see some messages about USBDEVFS_BULK failed - you can ignore this.
gio feb 16 15:15:55 CET 2006
The modem_run command failed (code 235)
modem_run results:
Mutex value not OK
FAILED because of modem_run error 235
root@2[knoppix]#
---------
Capisco che qualcosa non va,dato che il modem non si configura affatto..
e non riesco a lanciare il microcode..mi dice ke il comando è errato..o qlksa del genere..
Perdonatemi,ma sono un niubbo che comunque ha cercato di essere il più preciso possibile.
Qualcuno sa dirmi cosa devo fare per configurare il mio modem con knoppix(ed anceh con altre distro magari,se il procedimento è uguale)
dove ho sbaglaito?tralascio qualcosa?
Grazie.