supermario
03-12-2005, 17:21
Ciao
praticamente ho un problema col mio seagate da 120gb, ma nn sembra il solito problema!quando avvio win, col disco attaccato mi da schermata blu e si riavvia e raramente arriva fino a win
con disco staccato tutto parte normalmente
il disco è correttamente rilevato dal bios e nn ci sono errori nelle partizioni, xò c'è questa maledetta schermata blu!
ho provato a fare una diagnosi con il seatools e nei test il disco sembra singhiozzare, molto.
questo è il report
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
12/3/2005 @ 4:10 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 07/06/05
Conventional Memory size 628 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
120 GB ST3120026A
Serial Number = xxxxxxxxxx
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 14593x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 21975 112817
EXTENDED
2 Unknown 21976 35972 7224
Diagnostic Results:
Seagate DiagATA Quick Test Result: Skipped
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 03-Dec-2005 15:57:05
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026A
Serial Number: xxxxxxxxxx
Firmware Revision: 8.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Check: Passed
AtaCore Error 2 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
Short Test Aborted by End User: 03-Dec-2005 16:08:56
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Failed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 03-Dec-2005 16:09:56
Cable Test - 0 Errors
Buffer Test - 0 Errors
AtaCore Error 11 in Identify
Long Test Failed: 03-Dec-2005 16:10:17
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (112.8 GB) DATI) Not Tested
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (Unknown (7.2 GB) No Name) Not Tested
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
If you have experienced a data loss, cease drive operation
immediately. Professional data recovery service is the best
option to recover your data.
========================================================
cosa mi consigliate di fare?
ho provato col chkdisk di winxp ma nn sto riuscendo ad avviare il comando, con un floppy di boot posso farlo?
ciauz
praticamente ho un problema col mio seagate da 120gb, ma nn sembra il solito problema!quando avvio win, col disco attaccato mi da schermata blu e si riavvia e raramente arriva fino a win
con disco staccato tutto parte normalmente
il disco è correttamente rilevato dal bios e nn ci sono errori nelle partizioni, xò c'è questa maledetta schermata blu!
ho provato a fare una diagnosi con il seatools e nei test il disco sembra singhiozzare, molto.
questo è il report
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
12/3/2005 @ 4:10 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 07/06/05
Conventional Memory size 628 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
120 GB ST3120026A
Serial Number = xxxxxxxxxx
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 14593x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 21975 112817
EXTENDED
2 Unknown 21976 35972 7224
Diagnostic Results:
Seagate DiagATA Quick Test Result: Skipped
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 03-Dec-2005 15:57:05
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026A
Serial Number: xxxxxxxxxx
Firmware Revision: 8.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Check: Passed
AtaCore Error 2 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
AtaCore Error 11 in SmartReadData
Short Test Aborted by End User: 03-Dec-2005 16:08:56
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Failed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 03-Dec-2005 16:09:56
Cable Test - 0 Errors
Buffer Test - 0 Errors
AtaCore Error 11 in Identify
Long Test Failed: 03-Dec-2005 16:10:17
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (112.8 GB) DATI) Not Tested
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (Unknown (7.2 GB) No Name) Not Tested
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
If you have experienced a data loss, cease drive operation
immediately. Professional data recovery service is the best
option to recover your data.
========================================================
cosa mi consigliate di fare?
ho provato col chkdisk di winxp ma nn sto riuscendo ad avviare il comando, con un floppy di boot posso farlo?
ciauz