eoore sulla masterizzazione [Archivio]

sattv

19-11-2005, 16:15

vi prego aiutatemi!! questo e' il file log :

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.07 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST310212A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : E-IDE CD-ROM 52X/AKH atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D E: CDRom0
E-IDE CD-ROM 52X/AKH F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523804kB)
Free physical memory: 273MB (280504kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.11.2005
===== Disc-Copy over image - 1st step : Copy to image ...

23.31.11 #1 SPTI -1066 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04710600: Len x1008

23.31.21 #2 SPTI -1066 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04711c00: Len x1008

23.31.23 #3 SPTI -1066 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04711c00: Len x1008

23.31.58 #4 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

23.31.58 #5 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: sconosciuto. Medium required by compilation: DVD.)

23.31.59 #6 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23.31.59 #7 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory

23.31.59 #8 Text 0 File Reader.cpp, Line 124
Reader running

23.31.59 #9 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

23.32.00 #10 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2282048 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

23.32.00 #11 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2282048 = 2282048, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

23.32.00 #12 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

23.32.00 #13 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2282047 (507:07.22, 4457MB)

23.32.00 #14 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

23.32.00 #15 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23.32.00 #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Dati (modo 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2282048 (2282048) = #2282048/507:7.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282048 blocks [Image Recorder]
--------------------------------------------------------------

23.32.00 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4673634304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2282048 | lead-out | 1 | 0x41 | 0x00

23.32.00 #18 Phase 120 File dlgbrnst.cpp, Line 1725
Creating the image for burning

23.32.00 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

23.45.31 #20 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 2282048 (22D240h), length 0 blocks

23.45.32 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23.45.32 #22 Phase 121 File dlgbrnst.cpp, Line 1725
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

23.45.44 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

23.45.44 #2 Text 0 File Reader.cpp, Line 124
Reader running

23.45.44 #3 Text 0 File Writer.cpp, Line 113
Writer E: PIONEER DVD-RW DVR-106D running

23.45.44 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4673634304
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:07.23 ( 2282048) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Augusto\Documenti\TempImage.nrg>

23.45.45 #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

23.47.39 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2282047 (507:07.22, 4457MB)

23.47.39 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

23.47.39 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

23.47.39 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: sconosciuto. Medium required by compilation: DVD+R/RW; DVD-R/RW.)

23.47.39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2282048 (2282048) = #2282048/507:7.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282048 blocks [E: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

23.47.39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4673634304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2282048 | lead-out | 1 | 0x41 | 0x00

23.47.39 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23.47.39 #13 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 2x (2.770 KB/s)

23.47.46 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

23.47.46 #15 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

23.47.46 #16 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

23.47.46 #17 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

23.47.46 #18 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

23.47.49 #19 Text 0 File Cdrdrv.cpp, Line 1197
23:47:49.640 - E: PIONEER DVD-RW DVR-106D : Queue again later

23.48.26 #20 Text 0 File Cdrdrv.cpp, Line 1197
23:48:26.312 - E: PIONEER DVD-RW DVR-106D : Queue again later

0.15.38 #21 Text 0 File WriterStatus.cpp, Line 116
<E: PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 2282048 (22D240h), length 0 blocks

0.15.38 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

0.15.38 #23 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2282047

0.15.43 #24 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 2x (2.770 KB/s)

0.15.45 #25 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2x (2.770 KB/s)

0.15.45 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

0.15.45 #27 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

0.15.45 #28 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

0.15.45 #29 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

0.15.45 #30 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0.15.47 #31 Text 0 File Cdrdrv.cpp, Line 1197
00:15:47.921 - E: PIONEER DVD-RW DVR-106D : Queue again later

0.16.16 #32 SPTI -1061 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 0E 00 00 00 00 44
Buffer x03bc0000: Len x10000
0x00 00 01 BA 44 00 85 16 DC E1 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 35 C1 BB FF C1 37 FF 60 1D
0xC0 55 00 14 3D 1B F1 BB 46 8D 1B CF 6F A2 26 A3

0.16.16 #33 CDR -1061 File Writer.cpp, Line 302
Internal target failure
E: PIONEER DVD-RW DVR-106D

0.16.16 #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

0.16.16 #35 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

0.16.17 #36 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 767

0.16.17 #37 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2x (2.770 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 19.37.14 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)