megamitch
07-11-2005, 21:22
Ciao a tutti,
ho recentemente installato sul mio Acer TM 8004LMi la nuova Suse 10. La scelta è stata dettata dal fatto che un mio collega utilizza Suse fin dalla 9.1 sullo stesso portatile e si è trovato bene.
Io purtroppo ho il seguente problema con l'unità DvD RW.
All'avvio del sistema l'unità viene rilevata in fase di boot (/dev/hdc), solo che al termine del boot il device /dev/hdc non esiste !
Per ora ho notato che un possibile modo di "aggirare" l'ostacolo accendendo il PC con lo sportellino del lettore aperto. In questo modo sembra che il device venga riconosciuto correttamente.
Che posso fare per risolvere l'inconveniente?
Allego un estratto del'output di dmesg relativo al device in questione
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
input: AT Translated Set 2 keyboard on isa0060/serio0
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (38 C)
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Attempting manual resume
swsusp: Suspend partition has wrong signature?
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udev[2138]: run_program: open /dev/null failed
udev[2138]: run_program: exec of program '/sbin/modprobe' failed
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
ho recentemente installato sul mio Acer TM 8004LMi la nuova Suse 10. La scelta è stata dettata dal fatto che un mio collega utilizza Suse fin dalla 9.1 sullo stesso portatile e si è trovato bene.
Io purtroppo ho il seguente problema con l'unità DvD RW.
All'avvio del sistema l'unità viene rilevata in fase di boot (/dev/hdc), solo che al termine del boot il device /dev/hdc non esiste !
Per ora ho notato che un possibile modo di "aggirare" l'ostacolo accendendo il PC con lo sportellino del lettore aperto. In questo modo sembra che il device venga riconosciuto correttamente.
Che posso fare per risolvere l'inconveniente?
Allego un estratto del'output di dmesg relativo al device in questione
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
input: AT Translated Set 2 keyboard on isa0060/serio0
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (38 C)
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Attempting manual resume
swsusp: Suspend partition has wrong signature?
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udev[2138]: run_program: open /dev/null failed
udev[2138]: run_program: exec of program '/sbin/modprobe' failed
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...