Nud
12-10-2005, 14:32
Tra questi 2 alimentatori:
ENERMAX EG485AX-VHB(W) SFMA24P 480W che ha queste caratteristiche:
Type: ATX 12/24pin
Maximum Power: 480W
PFC: No
Power Good Signal: Not Specified
Hold-up Time: Not Specified
Efficiency: Not Specified
Over Voltage Protection: +5V: 5.5V~7.0V / +3.3V: 3.76V~4.3V / +12V1 & +12V2: 13.4V~15.6V
Overload Protection: 110%- 160% of max load
Input Voltage: 80A /230V and 40A/115V max. du
Input Frequency Range: 47- 63Hz
Input Current: N/A
Output: +3.3V@34A, +5V@40A, +12V1@16A, +12V2@15A, [email protected], [email protected]
Cooling: 1x 7cm axial fan, 1x 8cm axial fan, centrifuge fan
MTBF: Not Specified
Approvals: UL (Level 3), cUL (Level 3), VDE, CB, NEMKO, SEMKO
PREZZO 102 euro
e questo altro modello: ENERMAX EG495AX-VE(W) SFMA 485W
con queste caratteristiche:
AC Input (G): 180~265V or (W): 90~265V(Auto Adjusted)
Lin(AC)=115V/230V: 3.5A
(W):100~240VAC: 7.5A~3.5A
Frequency: 47Hz~63Hz
Inrush Current: Limiting 80A /230V and 40A/115V max during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
DC Output Rating: +3.3V: 32A // +5V: 32A // +12V1: 18A // +12V2: 15A
Total power: 485W
Over Voltage Protection: +5V: 5.5V~7.0V +3.3V: 3.76V~4.3V +12V1 & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over Current Protection: +3.3V: 55A (max) +5V: 48A (max) +12V1 & +12V2: 20A (max)
Over Temp. Protection: 90 C ~ 100 C (±10%) at heat sink
Under Temp. Protection: 0C for heat sink (±2C)
Operation Temperature: 0C ~ 40C
Storage Temperature: -40C ~ 70C
Humidity: operation:to 85%, relative humidity, non condensing at 25C; Storage:to 95%, relative humidity, non condensing at 50C
M.T.B.F.: greater than 100k hours at 70% of full rated load; 230 VAC / 50Hz input; 25C ambient
EMC: EN55022 Class B, EN61000-3-2 Class D, EN61000-3-3, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: UL (Level 3), cUL (Level 3), VDE, CB, NEMKO, SEMKO, DEMKO, FIMKO
Cooling: 8cm axial fan* 1; 9cm axial fan*1
Dimentions: W150 * H86 * D140 (mm)
PREZZO 93 euro.
il prezzo è simile, ma se ho capito bene il primo deovrebbe essere un pò più spinto sugli ampere dell'output anche se ha 5W in meno
giusto?
se è così per 10 euro in + prendertei il 480W
ENERMAX EG485AX-VHB(W) SFMA24P 480W che ha queste caratteristiche:
Type: ATX 12/24pin
Maximum Power: 480W
PFC: No
Power Good Signal: Not Specified
Hold-up Time: Not Specified
Efficiency: Not Specified
Over Voltage Protection: +5V: 5.5V~7.0V / +3.3V: 3.76V~4.3V / +12V1 & +12V2: 13.4V~15.6V
Overload Protection: 110%- 160% of max load
Input Voltage: 80A /230V and 40A/115V max. du
Input Frequency Range: 47- 63Hz
Input Current: N/A
Output: +3.3V@34A, +5V@40A, +12V1@16A, +12V2@15A, [email protected], [email protected]
Cooling: 1x 7cm axial fan, 1x 8cm axial fan, centrifuge fan
MTBF: Not Specified
Approvals: UL (Level 3), cUL (Level 3), VDE, CB, NEMKO, SEMKO
PREZZO 102 euro
e questo altro modello: ENERMAX EG495AX-VE(W) SFMA 485W
con queste caratteristiche:
AC Input (G): 180~265V or (W): 90~265V(Auto Adjusted)
Lin(AC)=115V/230V: 3.5A
(W):100~240VAC: 7.5A~3.5A
Frequency: 47Hz~63Hz
Inrush Current: Limiting 80A /230V and 40A/115V max during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
DC Output Rating: +3.3V: 32A // +5V: 32A // +12V1: 18A // +12V2: 15A
Total power: 485W
Over Voltage Protection: +5V: 5.5V~7.0V +3.3V: 3.76V~4.3V +12V1 & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over Current Protection: +3.3V: 55A (max) +5V: 48A (max) +12V1 & +12V2: 20A (max)
Over Temp. Protection: 90 C ~ 100 C (±10%) at heat sink
Under Temp. Protection: 0C for heat sink (±2C)
Operation Temperature: 0C ~ 40C
Storage Temperature: -40C ~ 70C
Humidity: operation:to 85%, relative humidity, non condensing at 25C; Storage:to 95%, relative humidity, non condensing at 50C
M.T.B.F.: greater than 100k hours at 70% of full rated load; 230 VAC / 50Hz input; 25C ambient
EMC: EN55022 Class B, EN61000-3-2 Class D, EN61000-3-3, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: UL (Level 3), cUL (Level 3), VDE, CB, NEMKO, SEMKO, DEMKO, FIMKO
Cooling: 8cm axial fan* 1; 9cm axial fan*1
Dimentions: W150 * H86 * D140 (mm)
PREZZO 93 euro.
il prezzo è simile, ma se ho capito bene il primo deovrebbe essere un pò più spinto sugli ampere dell'output anche se ha 5W in meno
giusto?
se è così per 10 euro in + prendertei il 480W