riboulez
29-08-2005, 15:14
Dopo due settimane d prova e rirpova nell'installazione del moem Hamlet640 usb con chip conexant nn mi resta ke kiedere a voi un aiuto, anke xkè sto impazzendo e d usare winzzoz nn ne posso +.
Premetto ke ho già letto gli altri post riguardanti il caso senza trovare la soluzione.
Allora ho seguito la procedura d'installazione della guida http://cxacru.altervista.org/ utilizzando la slack 10.1 cn kernel 2.4.29.
Dopo diversi problemi sn riuscito ad installare tt l'occorrente senza errori, il modem viene riconosciuto, carica anke la linea e crea una connessione ppp0, ma il tutto senza esito, infatti nn riesco ad ottenere l'ip sulla ppp0 e d conseguenza non navigo.
il log del comando "cxstart.sh" è:
>>> Inits Conexant AccessRunner <<<
>>> Removing cxacru driver...
>>> Loading firmware...
Conexant AccessRunner microcode upload program. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation
I found ADSL modem with VendorID = 0572 & ProductID = cafe
Loading and sending /usr/sbin/cxfirm1.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
..........
ADSL line is up (Downstream 4832 Kbits/s, Upstream 320 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...
/usr/sbin/cxload.sh successful
Setting PPP over ATM...
>>> Setting PPPoA <<<
>>> Loading ppp_generic...
>>> Loading pppoatm...
>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation
I found ADSL modem with VendorID = 0572 & ProductID = cafe
>>> Loading pppd daemon...
Plugin /usr/local/lib/pppd/2.4.3/pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:8.35
/usr/sbin/cxnet2up.sh successful
quindi nessun problema qui vero?
poi in seguito al comando "ifconfig ppp0" ottengo:
ppp0 Link encap:Point-to-Point Protocol
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
infine l'output di "lsmod" è:
Module Size Used by Not tainted
cxacru 10480 1
pppoatm 2424 1
ppp_generic 19556 3 [pppoatm]
slhc 4640 0 [ppp_generic]
nfsd 68112 1
keybdev 1860 0 (unused)
mousedev 4020 0 (unused)
hid 20772 0 (unused)
input 3360 0 [keybdev mousedev hid]
audio 41752 0 (unused)
soundcore 3588 2 [audio]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
e1000 67596 0
emu10k1-gp 1192 0 (unused)
gameport 1612 0 [emu10k1-gp]
ohci1394 23952 0 (unused)
ieee1394 43204 0 [ohci1394]
ntfs 51232 2 (autoclean)
ide-scsi 9392 0
il file /etc/ppp/options è configurato come nella guida indicata sopra, mentre il resolv.conf ho provato ha configurarlo in diverse maniere:
1) nameserver 213.205.36.70 (qsti sn i dns locali di tiscali, qndi corretti)
nameserver 213.205.32.70
2) search tiscali.it
nameserver 213.205.36.70
nameserver 213.205.32.70
3) search tiscali.it
...il risultato xrò nn cambia.
User e password sn corretti...
cosa c'è ke nn và? cosa altro posso provare a fare?
P.S: mi scuso x la lunghezza del post ma volevo essere il + kiaro possibile, thx.
Premetto ke ho già letto gli altri post riguardanti il caso senza trovare la soluzione.
Allora ho seguito la procedura d'installazione della guida http://cxacru.altervista.org/ utilizzando la slack 10.1 cn kernel 2.4.29.
Dopo diversi problemi sn riuscito ad installare tt l'occorrente senza errori, il modem viene riconosciuto, carica anke la linea e crea una connessione ppp0, ma il tutto senza esito, infatti nn riesco ad ottenere l'ip sulla ppp0 e d conseguenza non navigo.
il log del comando "cxstart.sh" è:
>>> Inits Conexant AccessRunner <<<
>>> Removing cxacru driver...
>>> Loading firmware...
Conexant AccessRunner microcode upload program. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation
I found ADSL modem with VendorID = 0572 & ProductID = cafe
Loading and sending /usr/sbin/cxfirm1.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
..........
ADSL line is up (Downstream 4832 Kbits/s, Upstream 320 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...
/usr/sbin/cxload.sh successful
Setting PPP over ATM...
>>> Setting PPPoA <<<
>>> Loading ppp_generic...
>>> Loading pppoatm...
>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation
I found ADSL modem with VendorID = 0572 & ProductID = cafe
>>> Loading pppd daemon...
Plugin /usr/local/lib/pppd/2.4.3/pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:8.35
/usr/sbin/cxnet2up.sh successful
quindi nessun problema qui vero?
poi in seguito al comando "ifconfig ppp0" ottengo:
ppp0 Link encap:Point-to-Point Protocol
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
infine l'output di "lsmod" è:
Module Size Used by Not tainted
cxacru 10480 1
pppoatm 2424 1
ppp_generic 19556 3 [pppoatm]
slhc 4640 0 [ppp_generic]
nfsd 68112 1
keybdev 1860 0 (unused)
mousedev 4020 0 (unused)
hid 20772 0 (unused)
input 3360 0 [keybdev mousedev hid]
audio 41752 0 (unused)
soundcore 3588 2 [audio]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
e1000 67596 0
emu10k1-gp 1192 0 (unused)
gameport 1612 0 [emu10k1-gp]
ohci1394 23952 0 (unused)
ieee1394 43204 0 [ohci1394]
ntfs 51232 2 (autoclean)
ide-scsi 9392 0
il file /etc/ppp/options è configurato come nella guida indicata sopra, mentre il resolv.conf ho provato ha configurarlo in diverse maniere:
1) nameserver 213.205.36.70 (qsti sn i dns locali di tiscali, qndi corretti)
nameserver 213.205.32.70
2) search tiscali.it
nameserver 213.205.36.70
nameserver 213.205.32.70
3) search tiscali.it
...il risultato xrò nn cambia.
User e password sn corretti...
cosa c'è ke nn và? cosa altro posso provare a fare?
P.S: mi scuso x la lunghezza del post ma volevo essere il + kiaro possibile, thx.