Torna indietro   Hardware Upgrade Forum > Software > Linux, Unix, OS alternativi

ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ultrawide si fondono
ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ultrawide si fondono
Da ASUS un monitor particolare ma molto completo: principalmente indirizzato al videogiocatore, può essere sfruttato con efficacia anche per attività creative e di produzione multimediale
Dreame L10s Pro Ultra Heat: la pulizia di casa tutta sostanza
Dreame L10s Pro Ultra Heat: la pulizia di casa tutta sostanza
Il nuovo robot aspirapolvere domestico di Dreame abbina funzionalità complete a un moccio flottante che raggiunge al meglio gli angoli delle pareti. Un prodotto tutto in uno semplice da utilizzare ma molto efficace, in grado di rispondere al meglio alle necessità di pulizia della casa
HONOR Magic6 Pro: come funziona Magic Portal, il modo ''intelligente'' di condividere
HONOR Magic6 Pro: come funziona Magic Portal, il modo ''intelligente'' di condividere
HONOR ha introdotto con Magic6 Pro la funzione Magic Portal che consente, tramite intelligenza artificiale, di suggerire scorciatoie agli utenti in modo da permettere di passare e accedere facilmente ai servizi tra app e dispositivi con un semplice tocco. Vi spieghiamo qui come funziona
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 30-10-2007, 08:34   #21
Kyodo
Member
 
Iscritto dal: May 2003
Città: Legnano
Messaggi: 232
Ma NOKIA?!
__________________
DELL STUDIO XPS 16: Core i7 820 QM - RGB LED 16" Full HD - 4 GB RAM 1333 Mhz - Radeon HD 4670 Mobility 1 GB - SDD Intel X25 M 80 GB - WLAN Intel 5300
Kyodo è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 09:29   #22
masand
Moderatore
 
L'Avatar di masand
 
Iscritto dal: Feb 2003
Città: Anagni/Firenze
Messaggi: 9113
Quote:
Originariamente inviato da Kyodo Guarda i messaggi
Ma NOKIA?!
Codice:
Name	Connection	Supported features
Nokia 1100	fbus	info, call
Nokia 1110i	Not supported
Nokia 2125i	Not supported
Nokia 2630	blueat	info, sms, phonebook, call
Nokia 3100	fbuspl2303	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 3100	fbus	info, sms, phonebook, calendar
Nokia 3100	Not supported
Nokia 3105	dku5fbus	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 3110 classic	blueat	info, phonebook, enhancedphonebook
Nokia 3120	fbuspl2303	info, sms, phonebook, calendar, call
Nokia 3120	fbusdku5	info, sms, phonebook, enhancedphonebook, calendar, filesystem, call, logo, ringtone
Nokia 3200	fbuspl2303	info
Nokia 3200	irdaobex	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 3205	dku5fbus	info, phonebook, calendar, filesystem, ringtone
Nokia 3210 (NSE-8)	fbus	info, sms
Nokia 3220	dlr3	info, phonebook, filesystem, logo, ringtone
Nokia 3220	fbusdku5	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 3220	fbus	info, filesystem, call
Nokia 3220	at115200	info, filesystem, call
Nokia 3310	fbus	info, sms, phonebook
Nokia 3510i	fbus	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 3586	Not supported
Nokia 3589i	fbuspl2303	info, phonebook, enhancedphonebook, calendar, filesystem, ringtone
Nokia 3650	at115200	info, sms, call
Nokia 5110	fbus	info, sms, phonebook
Nokia 5140	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo
Nokia 5140	fbusdlr3	info, sms, phonebook
Nokia 5200	bluerfphonet	info, sms, phonebook, calendar, todo, filesystem, call, ringtone
Nokia 5200	fbusdku5	info, phonebook
Nokia 5200	at115200	info, phonebook, enhancedphonebook
Nokia 5200	at19200	info, phonebook
Nokia 5300	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar, todo
Nokia 5300	at19200	info, sms, phonebook
Nokia 5500 sport	Not supported
Nokia 6015i	fbuspl2303	info
Nokia 6020	dlr3	info, sms, phonebook, calendar, filesystem, call, logo, ringtone
Nokia 6020	irdaphonet	info, sms, phonebook, calendar, todo
Nokia 6021	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar
Nokia 6021	bluerfphonet	info, phonebook, calendar, todo
Nokia 6021	blueat	info, sms
Nokia 6021	bluephonet	info, phonebook, enhancedphonebook, calendar, todo
Nokia 6021	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, call
Nokia 6021	at19200	info, sms
Nokia 6030	fbuspl2303	info, sms, phonebook, calendar, todo, filesystem
Nokia 6030	fbus	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6070	fbuspl2303	info, sms, phonebook, enhancedphonebook, calendar
Nokia 6080	at19200	info, sms, phonebook
Nokia 6085	bluerfat	info, phonebook, call
Nokia 6100	fbuspl2303	info, sms, phonebook, enhancedphonebook, calendar
Nokia 6100	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6101	fbusdku5	call
Nokia 6101	at115200	info, sms, phonebook, call
Nokia 6102	at19200	info, phonebook
Nokia 6103	bluephonet	info, phonebook, enhancedphonebook, calendar, todo, filesystem, call
Nokia 6108	Not supported
Nokia 6110	fbus	info
Nokia 6110 navigator	Not supported
Nokia 6111	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6111	bluephonet	info, phonebook, enhancedphonebook, calendar, todo
Nokia 6120C	at19200	info
Nokia 6125	bluephonet	info, sms, phonebook
Nokia 6131	bluerfat	info, sms, phonebook
Nokia 6131	blueat	info, sms, phonebook
Nokia 6131	at115200	info, sms
Nokia 6151	blueat	phonebook, enhancedphonebook, todo
Nokia 6151	bluephonet	
Nokia 6170	at19200	info, sms
Nokia 6210	fbusdlr3	info, call
Nokia 6210	at19200	info, sms, phonebook
Nokia 6220	at19200	info
Nokia 6225	fbusdku5	info, phonebook, calendar, todo, ringtone
Nokia 6225	fbus	info, calendar, filesystem, ringtone
Nokia 6230	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, call
Nokia 6230	bluefbus	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 6230	bluephonet	info, phonebook, enhancedphonebook, calendar, todo
Nokia 6230	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem
Nokia 6230	at19200	info, sms, phonebook, call
Nokia 6230i	bluerfphonet	info, sms, enhancedphonebook
Nokia 6230i	bluerffbus	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6230i	dku2phonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6230i	blueat	info, sms, phonebook, enhancedphonebook
Nokia 6230i	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call
Nokia 6230i	at19200	info, phonebook
Nokia 6233	bluerfat	info, sms, call
Nokia 6233	at19200	info, phonebook
Nokia 6234	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo
Nokia 6267	at19200	info, phonebook, call
Nokia 6270	bluephonet	info, sms, phonebook, enhancedphonebook, calendar
Nokia 6280	bluephonet	info, phonebook, enhancedphonebook, calendar, todo
Nokia 6280	bluephonet	info, phonebook, calendar, todo
Nokia 6280	at115200	info
Nokia 6288	blueat	info, phonebook, call
Nokia 6288	bluephonet	info, phonebook, calendar, todo
Nokia 6300	blueat	info, phonebook, calendar, todo, call
Nokia 6300	bluephonet	info, phonebook
Nokia 6300	fbus	info, sms, phonebook, call
Nokia 6310	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar
Nokia 6310i	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar, todo
Nokia 6310i	dku2phonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, ringtone
Nokia 6310i	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo, call
Nokia 6310i	phonetblue	info, phonebook, enhancedphonebook, calendar, todo, logo
Nokia 6310i	fbusdlr3	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 6340i	at19200	info, sms, phonebook, enhancedphonebook
Nokia 6600	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6600	at115200	info, sms, phonebook, call
Nokia 6610	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 6610	fbusdlr3	info, sms, phonebook, calendar
Nokia 6610	at19200	info, sms, calendar
Nokia 6610i	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, mms
Nokia 6610i	fbus	info, phonebook, filesystem, ringtone
Nokia 6630	at115200	info
Nokia 6670	at19200	info, sms
Nokia 6680	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6681	dku2phonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6810	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo
Nokia 6820	bluerfphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, mms
Nokia 6820	bluephonet	info, phonebook, enhancedphonebook, calendar, todo
Nokia 6820	bluephonet	info, phonebook, enhancedphonebook, filesystem
Nokia 7110	mbus	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 7110	fbus	info
Nokia 7210	irdaphonet	info, phonebook, calendar, filesystem, call, logo, ringtone
Nokia 7250i	dlr3	info
Nokia 7250i	fbus	info, sms, phonebook, enhancedphonebook, calendar, filesystem, call, ringtone
Nokia 7360	irdaphonet	info, sms, phonebook, enhancedphonebook, calendar, todo, logo
Nokia 7610	fbuspl2303	info
Nokia 8800	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone
Nokia 8910	Not supported
Nokia 9500	Not supported
Nokia E50	at115200	info
Nokia E60	Not supported
Nokia E61i	at19200	info
Nokia E62	at19200	info
Nokia E70	at19200	info
Nokia N30 M2M	at19200	sms
Nokia N70	fbus	info
Nokia N70	at19200	info
Nokia N75	Not supported
Nokia N80	at115200	info
Nokia N93	Not supported
Nokia N95	at115200	info
Sufficiente?

Un saluto a tutti...
masand
masand è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 09:57   #23
Kyodo
Member
 
Iscritto dal: May 2003
Città: Legnano
Messaggi: 232
Uhm.. il mio N73 non c'è..

Grazie comunque!
__________________
DELL STUDIO XPS 16: Core i7 820 QM - RGB LED 16" Full HD - 4 GB RAM 1333 Mhz - Radeon HD 4670 Mobility 1 GB - SDD Intel X25 M 80 GB - WLAN Intel 5300
Kyodo è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 13:40   #24
masand
Moderatore
 
L'Avatar di masand
 
Iscritto dal: Feb 2003
Città: Anagni/Firenze
Messaggi: 9113
Quote:
Originariamente inviato da Kyodo Guarda i messaggi
Uhm.. il mio N73 non c'è..

Grazie comunque!
Il modello N70 c'è, magari è compatibile, son due minuti a provare e se funziona, puoi segnalarlo al produttore che aggiornerà la lista.

Un saluto a tutti...
masand
masand è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 15:06   #25
zephyr83
Senior Member
 
L'Avatar di zephyr83
 
Iscritto dal: Oct 2004
Messaggi: 11965
Quote:
Originariamente inviato da Dcromato Guarda i messaggi
Zeph sei a 3000 messaggi!
Io ho chiesto solo wammu...
forte nn me n'ero accorto
Cmq a me nn scarica niente di gnome....oni distro pacchettizza a modo suo e c'è chi fa pacchettoni più grossi e chi più piccoli
__________________
"Non capisco quelli che dicono che per avere successo devono soffrire. Ma che so', scemi?"
Intel Core 2 Quad Q9450 @ 2.66 Ghz, Asus P5K-VM, Ram 4 GB A-Data + 2 GB Kingmax 800 Mhz, Gigabyte GeForce GT 710 2 GB GDDR5 passiva (GV-N710D5SL-2GL), SSD Crucial BX500 CT120BX500SSD1 120 GB, Monitor LCD Samsung S22C300 21.5'', router D-Link DVA-5592
zephyr83 è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 15:08   #26
zephyr83
Senior Member
 
L'Avatar di zephyr83
 
Iscritto dal: Oct 2004
Messaggi: 11965
Quote:
Originariamente inviato da Kyodo Guarda i messaggi
Uhm.. il mio N73 non c'è..

Grazie comunque!
prova per me è supportato visto che ci sn anche altri smartphone e anche più nuovo come l'n95. Cmq i nokia e si siemens dovebbero essere quelli più supportati (anche i sonyericsson).
__________________
"Non capisco quelli che dicono che per avere successo devono soffrire. Ma che so', scemi?"
Intel Core 2 Quad Q9450 @ 2.66 Ghz, Asus P5K-VM, Ram 4 GB A-Data + 2 GB Kingmax 800 Mhz, Gigabyte GeForce GT 710 2 GB GDDR5 passiva (GV-N710D5SL-2GL), SSD Crucial BX500 CT120BX500SSD1 120 GB, Monitor LCD Samsung S22C300 21.5'', router D-Link DVA-5592
zephyr83 è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 15:15   #27
masand
Moderatore
 
L'Avatar di masand
 
Iscritto dal: Feb 2003
Città: Anagni/Firenze
Messaggi: 9113
zephyr,

OT è sempre un piacere vedere il tuo avatar

Un saluto a tutti...
masand
masand è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 15:44   #28
thehuge
Member
 
L'Avatar di thehuge
 
Iscritto dal: Sep 2006
Città: ~
Messaggi: 146
Qualcuno ha provato con un Nokia 6600?

Quote:
Nokia 6600 bluephonet
Se uso bluephonet wammu mi da errore (alla connessione dice che "Il telefono non supporta questa funzione"), ed il log che stampa è questo:
Codice:
--------------- System information ----------------
Platform     linux2
Python       2.5.1
wxPython     2.6.3.2
Wammu        0.22
python-gammu 0.22
Gammu        1.13.0
Bluetooth    PyBluez
locales      it_IT (UTF8)
connection   bluephonet
device       00:0e:6d:ff:36:68
model        auto
[Gammu            - 1.13.0 built 14:58:05 Oct  9 2007 using gcc 4.1]
[Connection       - "bluephonet"]
[Connection index - 0]
[Model type       - ""]
[Device           - "00:0e:6d:ff:36:68"]
[Runing on        - Linux, kernel 2.6.22-14-generic (#1 SMP Sun Oct 14 23:05:12 GMT 2007)]
Device 00:0E:6D:FF:36:68 ("Nokia6600")
   Channel 9 - "OBEX Object Push" (score=0)
   Channel 2 - "Bluetooth Serial Port" (score=0)
   Channel 1 - "Fax" (score=0)
   Channel 1 - "Dial-up Networking" (score=0)
   Channel 10 - "OBEX File Transfer" (score=0)
   Channel 3 - "Handsfree Audio Gateway" (score=0)
Mi sapete dire per caso cosa sbaglio?
__________________
Computers are like conditioned air: they work fine 'till you open windows.

thehuge è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 16:31   #29
zephyr83
Senior Member
 
L'Avatar di zephyr83
 
Iscritto dal: Oct 2004
Messaggi: 11965
Quote:
Originariamente inviato da masand Guarda i messaggi
zephyr,

OT è sempre un piacere vedere il tuo avatar

Un saluto a tutti...
masand

Quote:
Originariamente inviato da thehuge Guarda i messaggi
Qualcuno ha provato con un Nokia 6600?


Se uso bluephonet wammu mi da errore (alla connessione dice che "Il telefono non supporta questa funzione"), ed il log che stampa è questo:
Codice:
--------------- System information ----------------
Platform     linux2
Python       2.5.1
wxPython     2.6.3.2
Wammu        0.22
python-gammu 0.22
Gammu        1.13.0
Bluetooth    PyBluez
locales      it_IT (UTF8)
connection   bluephonet
device       00:0e:6d:ff:36:68
model        auto
[Gammu            - 1.13.0 built 14:58:05 Oct  9 2007 using gcc 4.1]
[Connection       - "bluephonet"]
[Connection index - 0]
[Model type       - ""]
[Device           - "00:0e:6d:ff:36:68"]
[Runing on        - Linux, kernel 2.6.22-14-generic (#1 SMP Sun Oct 14 23:05:12 GMT 2007)]
Device 00:0E:6D:FF:36:68 ("Nokia6600")
   Channel 9 - "OBEX Object Push" (score=0)
   Channel 2 - "Bluetooth Serial Port" (score=0)
   Channel 1 - "Fax" (score=0)
   Channel 1 - "Dial-up Networking" (score=0)
   Channel 10 - "OBEX File Transfer" (score=0)
   Channel 3 - "Handsfree Audio Gateway" (score=0)
Mi sapete dire per caso cosa sbaglio?
hai provato a fare il riconoscimento automatico? se no prova cn bluat (a me va cn quello sul mio sonyericsson)
__________________
"Non capisco quelli che dicono che per avere successo devono soffrire. Ma che so', scemi?"
Intel Core 2 Quad Q9450 @ 2.66 Ghz, Asus P5K-VM, Ram 4 GB A-Data + 2 GB Kingmax 800 Mhz, Gigabyte GeForce GT 710 2 GB GDDR5 passiva (GV-N710D5SL-2GL), SSD Crucial BX500 CT120BX500SSD1 120 GB, Monitor LCD Samsung S22C300 21.5'', router D-Link DVA-5592
zephyr83 è offline   Rispondi citando il messaggio o parte di esso
Old 30-10-2007, 18:05   #30
thehuge
Member
 
L'Avatar di thehuge
 
Iscritto dal: Sep 2006
Città: ~
Messaggi: 146
Quote:
Originariamente inviato da zephyr83 Guarda i messaggi
hai provato a fare il riconoscimento automatico? se no prova cn bluat (a me va cn quello sul mio sonyericsson)
Ho provato con il riconoscimento automatico, ma mi dice che non trova nessun telefono.

Ho provato anche con bluat e mi da lo stesso errore di prima.

La situazione migliore che sono riuscito ad ottenere è stata con bluerfat, con cui si connette al telefono senza errori, ma appena provo a fare qualsiasi cosa (escluso Ottieni->Info), mi da un errore. Più precisamente:
Codice:
Errore di comunicazione con il telefono

Descrizione: Unknown error.
Funzione: GetNextMemory
Codice di errore: 27
Non posto il log perché è parecchio lungo, ma se dovesse servire dite pure.
__________________
Computers are like conditioned air: they work fine 'till you open windows.

thehuge è offline   Rispondi citando il messaggio o parte di esso
Old 31-10-2007, 09:40   #31
masand
Moderatore
 
L'Avatar di masand
 
Iscritto dal: Feb 2003
Città: Anagni/Firenze
Messaggi: 9113
Quote:
Originariamente inviato da thehuge Guarda i messaggi
Ho provato con il riconoscimento automatico, ma mi dice che non trova nessun telefono.

Ho provato anche con bluat e mi da lo stesso errore di prima.

La situazione migliore che sono riuscito ad ottenere è stata con bluerfat, con cui si connette al telefono senza errori, ma appena provo a fare qualsiasi cosa (escluso Ottieni->Info), mi da un errore. Più precisamente:
Codice:
Errore di comunicazione con il telefono

Descrizione: Unknown error.
Funzione: GetNextMemory
Codice di errore: 27
Non posto il log perché è parecchio lungo, ma se dovesse servire dite pure.
Strano... Anche perché il 6600 sembra essere strasupportato...
Codice:
Nokia 6600	bluephonet	info, sms, phonebook, enhancedphonebook, calendar, todo, filesystem, call, logo, ringtone, mms
Nokia 6600	at115200	info, sms, phonebook, call
Hai provato solo a fare collegamenti wireless? Il 6600 il cavetto ce l'ha?

P.S. Se hai feisty, prova ad installare il programma (e le dipendenze) dai repo di Treviño perché le versioni sono più recenti rispetto a quelle dei repository.

Un saluto a tutti...
masand

Ultima modifica di masand : 31-10-2007 alle 09:44.
masand è offline   Rispondi citando il messaggio o parte di esso
Old 31-10-2007, 16:55   #32
thehuge
Member
 
L'Avatar di thehuge
 
Iscritto dal: Sep 2006
Città: ~
Messaggi: 146
Quote:
Originariamente inviato da masand Guarda i messaggi
Hai provato solo a fare collegamenti wireless? Il 6600 il cavetto ce l'ha?
Solo wireless. Purtroppo non ho il cavo USB.
Comunque riesco a trasferire file al e dal telefono via bluetooth (usando altri tool), wammu è l'unica cosa che non riesco a far funzionare.

Quote:
P.S. Se hai feisty, prova ad installare il programma (e le dipendenze) dai repo di Treviño perché le versioni sono più recenti rispetto a quelle dei repository.
Ho gutsy, provo comunque a dare un'occhio alle versioni disponibili. Grazie.
__________________
Computers are like conditioned air: they work fine 'till you open windows.

thehuge è offline   Rispondi citando il messaggio o parte di esso
Old 31-10-2007, 18:03   #33
masand
Moderatore
 
L'Avatar di masand
 
Iscritto dal: Feb 2003
Città: Anagni/Firenze
Messaggi: 9113
Quote:
Originariamente inviato da thehuge Guarda i messaggi
Solo wireless. Purtroppo non ho il cavo USB.
Comunque riesco a trasferire file al e dal telefono via bluetooth (usando altri tool), wammu è l'unica cosa che non riesco a far funzionare.


Ho gutsy, provo comunque a dare un'occhio alle versioni disponibili. Grazie.
Ciao,
se hai Gutsy, allora hai già le versioni più recenti disponibili

Strano davvero il tuo problema... con un telefono "pienamente" supportato...

Un saluto a tutti...
masand
masand è offline   Rispondi citando il messaggio o parte di esso
Old 23-01-2008, 18:55   #34
graz848
Senior Member
 
L'Avatar di graz848
 
Iscritto dal: May 2005
Città: Ovest Bresciano
Messaggi: 487
Ciao, ho anche io provato wammu sulla mia gutsy e con il Sony Ericsson k750i.
Il telefono è subito riconosciuto e sembra andare tutto bene...
Ma mi succede una cosa strana: quando sincronizzo la rubrica del telefono (130 contatti circa), solo ad ALCUNI (diciamo 20) di questi wammu associa il nome correttamente ai vari numeri... tutti gli altri contatti appaiono con il campo del nome vuoto!!! Ho provato a capire perchè, ma non ho riscontrato nessun "criterio" per cui alcuni contatti vengono importati correttamente e altri senza nome... sembra casuale la scelta, se non fosse che si ripete sempre uguale ad ogni sincronizzazione...
Mettere i nomi a mano è ovviamente fuori discussione...
È un peccato, perchè sembra davvero un bel software, finalmente in grado di non farmi rimpiangere troppo MyPhoneExplorer... ma con questo bug è di fatto inutilizzabile...
A nessuno succede?
graz848 è offline   Rispondi citando il messaggio o parte di esso
Old 24-01-2008, 08:19   #35
psimem
Senior Member
 
L'Avatar di psimem
 
Iscritto dal: Jan 2006
Messaggi: 1525
Interessante programma, mi sa tanto che lo provero' sul mio storico 5100 anche se non lo vedo nella lista (c'e' pero' il 5110) sperem
__________________
-)(- debian -)(-
psimem è offline   Rispondi citando il messaggio o parte di esso
Old 14-09-2009, 02:06   #36
lupo lucio
Senior Member
 
Iscritto dal: Oct 2005
Città: Campofilone (Ascoli Piceno)
Messaggi: 467
Sto letteralmente impazzendo!!! Devo collegare il mio cellulare Benq Siemens SL91 (che teoricamente ha un software identico all'EF81 commercializzato in italia) ma purtroppo proprio non riesco a farlo identificare da Wannu, e stessa cosa con il Bitpim. Sapreste aiutarmi? Vorrei collegarlo via usb, ma dando il comando dmesg mi da il seguente risultato e non riesco a capire in quale porta usb è collegato :
Codice:
[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset     
[    0.000000] Initializing cgroup subsys cpu        
[    0.000000] Linux version 2.6.28-15-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 (Ubuntu 2.6.28-15.49-generic)                                                  
[    0.000000] Command line: root=UUID=ac197b12-6614-4359-b483-db4a7d8c4700 ro quiet splash                                                               
[    0.000000] KERNEL supported cpus:                                        
[    0.000000]   Intel GenuineIntel                                          
[    0.000000]   AMD AuthenticAMD                                            
[    0.000000]   Centaur CentaurHauls                                        
[    0.000000] BIOS-provided physical RAM map:                               
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)      
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)    
[    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)    
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002cb70000 (usable)      
[    0.000000]  BIOS-e820: 000000002cb70000 - 000000002cb80000 (ACPI NVS)    
[    0.000000]  BIOS-e820: 000000002cb80000 - 000000002fd4f000 (usable)      
[    0.000000]  BIOS-e820: 000000002fd4f000 - 000000002fdcf000 (reserved)    
[    0.000000]  BIOS-e820: 000000002fdcf000 - 000000002fecf000 (ACPI NVS)    
[    0.000000]  BIOS-e820: 000000002fecf000 - 000000002feff000 (ACPI data)   
[    0.000000]  BIOS-e820: 000000002feff000 - 000000002ff00000 (usable)      
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)    
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)    
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)    
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)    
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)    
[    0.000000] DMI 2.4 present.                                              
[    0.000000] last_pfn = 0x2ff00 max_arch_pfn = 0x3ffffffff                 
[    0.000000] Scanning 2 areas for low memory corruption                    
[    0.000000] modified physical RAM map:                                    
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)       
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)     
[    0.000000]  modified: 0000000000006000 - 0000000000008000 (usable)       
[    0.000000]  modified: 0000000000008000 - 0000000000010000 (reserved)     
[    0.000000]  modified: 0000000000010000 - 0000000000092c00 (usable)       
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)     
[    0.000000]  modified: 00000000000ef000 - 0000000000100000 (reserved)     
[    0.000000]  modified: 0000000000100000 - 000000002cb70000 (usable)       
[    0.000000]  modified: 000000002cb70000 - 000000002cb80000 (ACPI NVS)     
[    0.000000]  modified: 000000002cb80000 - 000000002fd4f000 (usable)       
[    0.000000]  modified: 000000002fd4f000 - 000000002fdcf000 (reserved)     
[    0.000000]  modified: 000000002fdcf000 - 000000002fecf000 (ACPI NVS)     
[    0.000000]  modified: 000000002fecf000 - 000000002feff000 (ACPI data)    
[    0.000000]  modified: 000000002feff000 - 000000002ff00000 (usable)       
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)     
[    0.000000]  modified: 00000000feb00000 - 00000000feb01000 (reserved)     
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)     
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)     
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)     
[    0.000000] init_memory_mapping: 0000000000000000-000000002ff00000        
[    0.000000]  0000000000 - 002fe00000 page 2M                              
[    0.000000]  002fe00000 - 002ff00000 page 4k                              
[    0.000000] kernel direct mapping tables up to 2ff00000 @ 10000-13000     
[    0.000000] last_map_addr: 2ff00000 end: 2ff00000                         
[    0.000000] RAMDISK: 2c3cb000 - 2cb5f47a                                  
[    0.000000] ACPI: RSDP 000F6930, 0014 (r0 HP    )                         
[    0.000000] ACPI: RSDT 2FEFE038, 0040 (r1 HPQOEM SLIC-MPC        3       1000013)                                                                      
[    0.000000] ACPI: FACP 2FEFD000, 0074 (r1 HP     0944            3 HP          1)                                                                      
[    0.000000] ACPI: DSDT 2FEE4000, 153D7 (r1 HP     0944            1 HP          1)                                                                     
[    0.000000] ACPI: FACS 2FE90000, 0040                                     
[    0.000000] ACPI: APIC 2FEFC000, 0084 (r1 HP     0944            1 HP          1)                                                                      
[    0.000000] ACPI: MCFG 2FEFB000, 003C (r1 HP     0944            1 HP          1)                                                                      
[    0.000000] ACPI: SSDT 2FEE3000, 0059 (r1 HP     0944            1 HP          1)                                                                      
[    0.000000] ACPI: TCPA 2FEE2000, 0032 (r2 HP     0944            0 HP          1)                                                                      
[    0.000000] ACPI: HPET 2FEE1000, 0038 (r1 HP     0944            1 HP          1)                                                                      
[    0.000000] ACPI: SSDT 2FEE0000, 016C (r1 AMD    PowerNow        1 AMD         1)                                                                      
[    0.000000] ACPI: Local APIC address 0xfee00000                           
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 002ff00000]  
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]                                                              
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]                                                              
[    0.000000]   #2 [0000200000 - 0000b7bbb0]    TEXT DATA BSS ==> [0000200000 - 0000b7bbb0]                                                              
[    0.000000]   #3 [002c3cb000 - 002cb5f47a]          RAMDISK ==> [002c3cb000 - 002cb5f47a]                                                              
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]                                                              
[    0.000000]   #5 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]                                                              
[    0.000000]  [ffffe20000000000-ffffe20000bfffff] PMD -> [ffff880001200000-ffff880001dfffff] on node 0                                                  
[    0.000000] Zone PFN ranges:                                              
[    0.000000]   DMA      0x00000000 -> 0x00001000                           
[    0.000000]   DMA32    0x00001000 -> 0x00100000                           
[    0.000000]   Normal   0x00100000 -> 0x00100000                           
[    0.000000] Movable zone start PFN for each node                          
[    0.000000] early_node_map[6] active PFN ranges                           
[    0.000000]     0: 0x00000000 -> 0x00000001                               
[    0.000000]     0: 0x00000006 -> 0x00000008                               
[    0.000000]     0: 0x00000010 -> 0x00000092                               
[    0.000000]     0: 0x00000100 -> 0x0002cb70                               
[    0.000000]     0: 0x0002cb80 -> 0x0002fd4f                               
[    0.000000]     0: 0x0002feff -> 0x0002ff00                               
[    0.000000] On node 0 totalpages: 195781                                  
[    0.000000]   DMA zone: 56 pages used for memmap                          
[    0.000000]   DMA zone: 2527 pages reserved                               
[    0.000000]   DMA zone: 1390 pages, LIFO batch:0                          
[    0.000000]   DMA32 zone: 2629 pages used for memmap                      
[    0.000000]   DMA32 zone: 189179 pages, LIFO batch:31                     
[    0.000000]   Normal zone: 0 pages used for memmap                        
[    0.000000]   Movable zone: 0 pages used for memmap                       
[    0.000000] ACPI: PM-Timer IO Port: 0x408                                 
[    0.000000] ACPI: Local APIC address 0xfee00000                           
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)            
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)           
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)           
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)           
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])           
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])           
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])           
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])           
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])       
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)      
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)    
[    0.000000] ACPI: IRQ0 used by override.                                  
[    0.000000] ACPI: IRQ2 used by override.                                  
[    0.000000] ACPI: IRQ9 used by override.                                  
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000                    
[    0.000000] Using ACPI (MADT) for SMP configuration information           
[    0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs                          
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000                                                                          
[    0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000                                                                          
[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000                                                                          
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000                                                                          
[    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000                                                                          
[    0.000000] PM: Registered nosave memory: 000000002cb70000 - 000000002cb80000                                                                          
[    0.000000] PM: Registered nosave memory: 000000002fd4f000 - 000000002fdcf000                                                                          
[    0.000000] PM: Registered nosave memory: 000000002fdcf000 - 000000002fecf000                                                                          
[    0.000000] PM: Registered nosave memory: 000000002fecf000 - 000000002feff000                                                                          
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 2ff00000:b0100000)                                                                     
[    0.000000] PERCPU: Allocating 69632 bytes of per cpu data                
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1                     
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190569                                                                
[    0.000000] Kernel command line: root=UUID=ac197b12-6614-4359-b483-db4a7d8c4700 ro quiet splash                                                        
[    0.000000] Initializing CPU#0                                            
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)         
[    0.000000] Fast TSC calibration using PIT                                
[    0.000000] Detected 2100.058 MHz processor.                              
[    0.004000] Console: colour VGA+ 80x25                                    
[    0.004000] console [tty0] enabled                                        
[    0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)                                                                          
[    0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.004000] allocated 7864320 bytes of page_cgroup                        
[    0.004000] please try cgroup_disable=memory option if you don't want     
[    0.004000] Scanning for low memory corruption every 60 seconds           
[    0.004000] Checking aperture...                                          
[    0.004000] No AGP bridge found                                           
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area                 
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! 
[    0.004000] Memory: 743172k/785408k available (4749k kernel code, 2284k absent, 39380k reserved, 2523k data, 532k init)                                
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1                                                                    
[    0.004000] hpet clockevent registered                                    
[    0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer                                                                           
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.11 BogoMIPS (lpj=8400220)                                  
[    0.004033] Security Framework initialized                                
[    0.004040] SELinux:  Disabled at boot.                                   
[    0.004052] AppArmor: AppArmor initialized                                
[    0.004061] Mount-cache hash table entries: 256                           
[    0.004222] Initializing cgroup subsys ns                                 
[    0.004225] Initializing cgroup subsys cpuacct                            
[    0.004228] Initializing cgroup subsys memory                             
[    0.004232] Initializing cgroup subsys freezer                            
[    0.004245] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)                                                                          
[    0.004247] CPU: L2 Cache: 512K (64 bytes/line)                           
[    0.004249] tseg: 002ff00000                                              
[    0.004252] using C1E aware idle routine                                  
[    0.004270] SMP alternatives: switching to UP code                        
[    0.116550] ACPI: Core revision 20080926                                  
[    0.123079] ACPI: Checking initramfs for custom DSDT                      
[    0.404054] Setting APIC routing to flat                                  
[    0.404648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1          
[    0.444702] CPU0: AMD Sempron(tm) SI-42 stepping 01                       
[    0.448001] Brought up 1 CPUs                                             
[    0.448001] Total of 1 processors activated (4200.11 BogoMIPS).           
[    0.448001] CPU0 attaching NULL sched-domain.                             
[    0.448001] net_namespace: 1400 bytes                                     
[    0.448001] Booting paravirtualized kernel on bare hardware               
[    0.448001] Time: 23:32:06  Date: 09/13/09                                
[    0.448001] regulator: core version 0.5                                   
[    0.448001] NET: Registered protocol family 16                            
[    0.448001] TOM: 0000000040000000 aka 1024M                               
[    0.448001] Fam 10h mmconf [e0000000, efffffff]                           
[    0.448001] ACPI: bus type pci registered                                 
[    0.448001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255                                                                           
[    0.448001] PCI: MCFG area at e0000000 reserved in E820                   
[    0.460926] PCI: Using MMCONFIG at e0000000 - efffffff                    
[    0.460929] PCI: Using configuration type 1 for base access               
[    0.462562] ACPI: EC: Look up EC in DSDT                                  
[    0.590408] ACPI: EC: non-query interrupt received, switching to interrupt mode                                                                        
[    0.628325] ACPI: Interpreter enabled                                     
[    0.628325] ACPI: (supports S0 S3 S4 S5)                                  
[    0.628325] ACPI: Using IOAPIC for interrupt routing                      
[    0.644942] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 
[    0.644945] ACPI: EC: driver started in interrupt mode                    
[    0.645268] ACPI: No dock devices found.                                  
[    0.645277] ACPI: PCI Root Bridge [PCI0] (0000:00)                        
[    0.645489] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold         
[    0.645493] pci 0000:00:04.0: PME# disabled                               
[    0.645533] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold         
[    0.645536] pci 0000:00:09.0: PME# disabled                               
[    0.645600] pci 0000:00:11.0: reg 10 io port: [0x4018-0x401f]             
[    0.645607] pci 0000:00:11.0: reg 14 io port: [0x4024-0x4027]             
[    0.645615] pci 0000:00:11.0: reg 18 io port: [0x4010-0x4017]             
[    0.645623] pci 0000:00:11.0: reg 1c io port: [0x4020-0x4023]             
[    0.645630] pci 0000:00:11.0: reg 20 io port: [0x4000-0x400f]             
[    0.645638] pci 0000:00:11.0: reg 24 32bit mmio: [0x52409000-0x524093ff]  
[    0.645682] pci 0000:00:12.0: reg 10 32bit mmio: [0x52408000-0x52408fff]  
[    0.645743] pci 0000:00:12.1: reg 10 32bit mmio: [0x52407000-0x52407fff]  
[    0.645825] pci 0000:00:12.2: reg 10 32bit mmio: [0x52409500-0x524095ff]  
[    0.645870] pci 0000:00:12.2: supports D1 D2                              
[    0.645871] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot          
[    0.645876] pci 0000:00:12.2: PME# disabled                               
[    0.645912] pci 0000:00:13.0: reg 10 32bit mmio: [0x52406000-0x52406fff]  
[    0.645973] pci 0000:00:13.1: reg 10 32bit mmio: [0x52405000-0x52405fff]  
[    0.646055] pci 0000:00:13.2: reg 10 32bit mmio: [0x52409400-0x524094ff]  
[    0.646100] pci 0000:00:13.2: supports D1 D2                              
[    0.646101] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot          
[    0.646106] pci 0000:00:13.2: PME# disabled                               
[    0.646240] pci 0000:00:14.2: reg 10 64bit mmio: [0x52400000-0x52403fff]  
[    0.646279] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold         
[    0.646284] pci 0000:00:14.2: PME# disabled                               
[    0.646399] pci 0000:00:14.5: reg 10 32bit mmio: [0x52404000-0x52404fff]  
[    0.646671] pci 0000:01:05.0: reg 10 32bit mmio: [0x40000000-0x4fffffff]  
[    0.646676] pci 0000:01:05.0: reg 14 io port: [0x3000-0x30ff]             
[    0.646681] pci 0000:01:05.0: reg 18 32bit mmio: [0x52300000-0x5230ffff]  
[    0.646691] pci 0000:01:05.0: reg 24 32bit mmio: [0x52200000-0x522fffff]  
[    0.646700] pci 0000:01:05.0: supports D1 D2                              
[    0.646813] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]             
[    0.646817] pci 0000:00:01.0: bridge 32bit mmio: [0x52200000-0x523fffff]  
[    0.646821] pci 0000:00:01.0: bridge 64bit mmio pref: [0x40000000-0x4fffffff]                                                                          
[    0.646917] pci 0000:02:00.0: reg 10 64bit mmio: [0x51100000-0x5110ffff]  
[    0.646954] pci 0000:02:00.0: PME# supported from D3hot D3cold            
[    0.646959] pci 0000:02:00.0: PME# disabled                               
[    0.647051] pci 0000:00:04.0: bridge io port: [0x2000-0x2fff]             
[    0.647054] pci 0000:00:04.0: bridge 32bit mmio: [0x51100000-0x521fffff]  
[    0.647059] pci 0000:00:04.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]                                                                          
[    0.647180] pci 0000:03:00.0: reg 10 64bit mmio: [0x51000000-0x51003fff]  
[    0.647217] pci 0000:03:00.0: supports D1 D2                              
[    0.647348] pci 0000:00:09.0: bridge 32bit mmio: [0x51000000-0x510fffff]  
[    0.647414] pci 0000:00:14.4: transparent bridge                          
[    0.647419] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]             
[    0.647442] bus 00 -> node 0                                              
[    0.647451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]           
[    0.647635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]      
[    0.647783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]      
[    0.647965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT]      
[    0.648185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]      
[    0.660586] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.660887] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.661186] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.661484] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.661783] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.662082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.662381] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.662680] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.                                                                
[    0.662862] ACPI: Power Resource [APPR] (off)                             
[    0.662968] ACPI: Power Resource [PFN0] (off)                             
[    0.663069] ACPI: Power Resource [PFN1] (off)                             
[    0.663170] ACPI: Power Resource [PFN2] (off)                             
[    0.663270] ACPI: Power Resource [PFN3] (off)                             
[    0.663370] ACPI: Power Resource [PFN4] (off)                             
[    0.663524] ACPI: WMI: Mapper loaded                                      
[    0.663711] SCSI subsystem initialized                                    
[    0.663749] libata version 3.00 loaded.                                   
[    0.663791] usbcore: registered new interface driver usbfs                
[    0.663806] usbcore: registered new interface driver hub                  
[    0.663833] usbcore: registered new device driver usb                     
[    0.663940] PCI: Using ACPI for IRQ routing                               
[    0.684009] Bluetooth: Core ver 2.13                                      
[    0.684053] NET: Registered protocol family 31                            
[    0.684054] Bluetooth: HCI device and connection manager initialized      
[    0.684057] Bluetooth: HCI socket layer initialized                       
[    0.684059] NET: Registered protocol family 8                             
[    0.684061] NET: Registered protocol family 20                            
[    0.684070] NetLabel: Initializing                                        
[    0.684071] NetLabel:  domain hash size = 128                             
[    0.684073] NetLabel:  protocols = UNLABELED CIPSOv4                      
[    0.684086] NetLabel:  unlabeled traffic allowed by default               
[    0.684187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 2303, 0                 
[    0.684192] hpet0: 4 comparators, 32-bit 14.318180 MHz counter            
[    0.688077] hpet: hpet2 irq 2303 for MSI                                  
[    0.688162] AppArmor: AppArmor Filesystem Enabled                         
[    0.692019] Switched to high resolution mode on CPU 0                     
[    0.700068] pnp: PnP ACPI init                                            
[    0.700081] ACPI: bus type pnp registered                                 
[    0.704417] pnp: PnP ACPI: found 12 devices                               
[    0.704419] ACPI: ACPI bus type pnp unregistered                          
[    0.704430] system 00:05: ioport range 0x400-0x4cf has been reserved      
[    0.704433] system 00:05: ioport range 0x4d0-0x4d1 has been reserved      
[    0.704435] system 00:05: ioport range 0x4d6-0x4d6 has been reserved      
[    0.704437] system 00:05: ioport range 0x680-0x6ff has been reserved      
[    0.704443] system 00:05: ioport range 0x77a-0x77a has been reserved      
[    0.704445] system 00:05: ioport range 0xc00-0xc01 has been reserved      
[    0.704447] system 00:05: ioport range 0xc14-0xc14 has been reserved      
[    0.704449] system 00:05: ioport range 0xc50-0xc52 has been reserved      
[    0.704452] system 00:05: ioport range 0xc6c-0xc6c has been reserved      
[    0.704454] system 00:05: ioport range 0xc6f-0xc6f has been reserved      
[    0.704456] system 00:05: ioport range 0xcd0-0xcdb has been reserved      
[    0.704458] system 00:05: ioport range 0x220-0x227 has been reserved      
[    0.704460] system 00:05: ioport range 0x260-0x273 has been reserved      
[    0.704463] system 00:05: ioport range 0x800-0x800 has been reserved      
[    0.704465] system 00:05: ioport range 0x804-0x804 has been reserved      
[    0.704467] system 00:05: ioport range 0x87f-0x87f has been reserved      
[    0.704469] system 00:05: ioport range 0xcdc-0xcdf has been reserved      
[    0.704472] system 00:05: ioport range 0xb00-0xb0f has been reserved      
[    0.704474] system 00:05: ioport range 0xb20-0xb3f has been reserved      
[    0.704477] system 00:05: ioport range 0x200-0x27f could not be reserved  
[    0.704482] system 00:06: iomem range 0x0-0x9ffff could not be reserved   
[    0.704484] system 00:06: iomem range 0xec000-0xfffff could not be reserved                                                                            
[    0.704487] system 00:06: iomem range 0x100000-0x3fffffff could not be reserved                                                                        
[    0.704489] system 00:06: iomem range 0xe0000000-0xefffffff has been reserved                                                                          
[    0.704492] system 00:06: iomem range 0xfeb00000-0xfeb00fff has been reserved                                                                          
[    0.704494] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved                                                                          
[    0.704496] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved                                                                          
[    0.709809] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01           
[    0.709812] pci 0000:00:01.0:   IO window: 0x3000-0x3fff                  
[    0.709817] pci 0000:00:01.0:   MEM window: 0x52200000-0x523fffff         
[    0.709820] pci 0000:00:01.0:   PREFETCH window: 0x00000040000000-0x0000004fffffff                                                                     
[    0.709825] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02           
[    0.709828] pci 0000:00:04.0:   IO window: 0x2000-0x2fff                  
[    0.709831] pci 0000:00:04.0:   MEM window: 0x51100000-0x521fffff         
[    0.709835] pci 0000:00:04.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff                                                                     
[    0.709839] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03           
[    0.709841] pci 0000:00:09.0:   IO window: disabled                       
[    0.709845] pci 0000:00:09.0:   MEM window: 0x51000000-0x510fffff         
[    0.709847] pci 0000:00:09.0:   PREFETCH window: disabled                 
[    0.709852] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80           
[    0.709921] pci 0000:00:14.4:   IO window: 0x1000-0x1fff                  
[    0.709927] pci 0000:00:14.4:   MEM window: disabled                      
[    0.709931] pci 0000:00:14.4:   PREFETCH window: disabled                 
[    0.709944] pci 0000:00:01.0: setting latency timer to 64                 
[    0.709951] pci 0000:00:04.0: setting latency timer to 64                 
[    0.709957] pci 0000:00:09.0: setting latency timer to 64                 
[    0.709965] bus: 00 index 0 io port: [0x00-0xffff]                        
[    0.709967] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]           
[    0.709969] bus: 01 index 0 io port: [0x3000-0x3fff]                      
[    0.709971] bus: 01 index 1 mmio: [0x52200000-0x523fffff]                 
[    0.709973] bus: 01 index 2 mmio: [0x40000000-0x4fffffff]                 
[    0.709974] bus: 01 index 3 mmio: [0x0-0x0]                               
[    0.709976] bus: 02 index 0 io port: [0x2000-0x2fff]                      
[    0.709978] bus: 02 index 1 mmio: [0x51100000-0x521fffff]                 
[    0.709980] bus: 02 index 2 mmio: [0x50000000-0x50ffffff]                 
[    0.709981] bus: 02 index 3 mmio: [0x0-0x0]                               
[    0.709983] bus: 03 index 0 mmio: [0x0-0x0]                               
[    0.709985] bus: 03 index 1 mmio: [0x51000000-0x510fffff]                 
[    0.709986] bus: 03 index 2 mmio: [0x0-0x0]                               
[    0.709988] bus: 03 index 3 mmio: [0x0-0x0]                               
[    0.709990] bus: 80 index 0 io port: [0x1000-0x1fff]                      
[    0.709991] bus: 80 index 1 mmio: [0x0-0x0]                               
[    0.709993] bus: 80 index 2 mmio: [0x0-0x0]                               
[    0.709994] bus: 80 index 3 io port: [0x00-0xffff]                        
[    0.709996] bus: 80 index 4 mmio: [0x000000-0xffffffffffffffff]           
[    0.710008] NET: Registered protocol family 2                             
[    0.748122] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)                                                                          
[    0.748449] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)                                                                       
[    0.749659] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)  
[    0.750258] TCP: Hash tables configured (established 131072 bind 65536)   
[    0.750261] TCP reno registered                                           
[    0.760179] NET: Registered protocol family 1                             
[    0.760304] checking if image is initramfs... it is                       
[    1.318886] Freeing initrd memory: 7761k freed                            
[    1.323746] audit: initializing netlink socket (disabled)                 
[    1.323761] type=2000 audit(1252884726.320:1): initialized                
[    1.331343] HugeTLB registered 2 MB page size, pre-allocated 0 pages      
[    1.332411] VFS: Disk quotas dquot_6.5.1                                  
[    1.332459] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)     
[    1.332964] fuse init (API version 7.10)                                  
[    1.333033] msgmni has been set to 1467                                   
[    1.333195] alg: No test for stdrng (krng)                                
[    1.333206] io scheduler noop registered                                  
[    1.333208] io scheduler anticipatory registered                          
[    1.333210] io scheduler deadline registered                              
[    1.333246] io scheduler cfq registered (default)                         
[    1.333420] pci 0000:01:05.0: Boot video device                           
[    1.339680] pcieport-driver 0000:00:04.0: setting latency timer to 64     
[    1.339715] pcieport-driver 0000:00:04.0: found MSI capability            
[    1.339741] pcieport-driver 0000:00:04.0: irq 2302 for MSI/MSI-X          
[    1.339752] pci_express 0000:00:04.0:pcie00: allocate port service        
[    1.339765] pci_express 0000:00:04.0:pcie03: allocate port service        
[    1.339813] pcieport-driver 0000:00:09.0: setting latency timer to 64     
[    1.339845] pcieport-driver 0000:00:09.0: found MSI capability            
[    1.339868] pcieport-driver 0000:00:09.0: irq 2301 for MSI/MSI-X          
[    1.339878] pci_express 0000:00:09.0:pcie00: allocate port service        
[    1.339888] pci_express 0000:00:09.0:pcie03: allocate port service        
[    1.339944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5               
[    1.339952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4   
[    1.648279] ACPI: AC Adapter [AC] (on-line)                               
[    1.728264] ACPI: Battery Slot [BAT0] (battery present)                   
[    1.728489] ACPI: Battery Slot [BAT1] (battery absent)                    
[    1.728617] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0                                                                  
[    1.728620] ACPI: Power Button (FF) [PWRF]                                
[    1.728666] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1                                                         
[    1.728668] ACPI: Sleep Button (CM) [SLPB]                                
[    1.728704] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2                                                                
[    1.728844] ACPI: Lid Switch [LID]                                        
[    1.729079] fan PNP0C0B:00: registered as cooling_device0                 
[    1.729085] ACPI: Fan [FAN0] (off)                                        
[    1.729292] fan PNP0C0B:01: registered as cooling_device1                 
[    1.729296] ACPI: Fan [FAN1] (off)                                        
[    1.729501] fan PNP0C0B:02: registered as cooling_device2                 
[    1.729506] ACPI: Fan [FAN2] (off)                                        
[    1.729716] fan PNP0C0B:03: registered as cooling_device3                 
[    1.729721] ACPI: Fan [FAN3] (off)                                        
[    1.729928] fan PNP0C0B:04: registered as cooling_device4                 
[    1.729932] ACPI: Fan [FAN4] (off)                                        
[    1.730192] processor ACPI_CPU:00: registered as cooling_device5          
[    1.730195] ACPI: Processor [CPU0] (supports 8 throttling states)         
[    1.741713] thermal LNXTHERM:01: registered as thermal_zone0              
[    1.750344] ACPI: Thermal Zone [CPUZ] (57 C)                              
[    1.772450] Linux agpgart interface v0.103                                
[    1.772461] Serial: 8250/16550 driver4 ports, IRQ sharing enabled         
[    1.773341] brd: module loaded                                            
[    1.773633] loop: module loaded                                           
[    1.773709] Fixed MDIO Bus: probed                                        
[    1.773714] PPP generic driver version 2.4.2                              
[    1.773766] input: Macintosh mouse button emulation as /devices/virtual/input/input3                                                                   
[    1.773798] Driver 'sd' needs updating - please use bus_type methods      
[    1.773805] Driver 'sr' needs updating - please use bus_type methods      
[    1.773841] ahci 0000:00:11.0: version 3.0                                
[    1.773927] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 
[    1.774157] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode                                                              
[    1.774160] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio  
[    1.775232] scsi0 : ahci                                                  
[    1.775350] scsi1 : ahci                                                  
[    1.775398] scsi2 : ahci                                                  
[    1.775443] scsi3 : ahci                                                  
[    1.775488] scsi4 : ahci                                                  
[    1.775536] scsi5 : ahci                                                  
[    1.775698] ata1: SATA max UDMA/133 abar m1024@0x52409000 port 0x52409100 irq 20                                                                       
[    1.775701] ata2: SATA max UDMA/133 abar m1024@0x52409000 port 0x52409180 irq 20                                                                       
[    1.775705] ata3: SATA max UDMA/133 abar m1024@0x52409000 port 0x52409200 irq 20                                                                       
[    1.775708] ata4: SATA max UDMA/133 abar m1024@0x52409000 port 0x52409280 irq 20                                                                       
[    1.775711] ata5: SATA max UDMA/133 abar m1024@0x52409000 port 0x52409300 irq 20                                                                       
[    1.775715] ata6: SATA max UDMA/133 abar m1024@0x52409000 port 0x52409380 irq 20                                                                       
[    2.092070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)        
[    2.092506] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100      
[    2.092509] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) 
[    2.093133] ata1.00: configured for UDMA/100                              
[    2.428068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)        
[    2.431680] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100  
[    2.436581] ata2.00: configured for UDMA/100                              
[    2.876066] ata3: SATA link down (SStatus 0 SControl 300)                 
[    3.212065] ata4: SATA link down (SStatus 0 SControl 300)                 
[    3.548065] ata5: SATA link down (SStatus 0 SControl 300)                 
[    3.884066] ata6: SATA link down (SStatus 0 SControl 300)                 
[    3.900138] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5                                                               
[    3.900226] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)                                                                    
[    3.900242] sd 0:0:0:0: [sda] Write Protect is off                        
[    3.900244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                     
[    3.900266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                    
[    3.900333] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)                                                                    
[    3.900345] sd 0:0:0:0: [sda] Write Protect is off                        
[    3.900347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                     
[    3.900368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                    
[    3.900372]  sda: sda1 sda2 < sda5 >                                      
[    3.954828] sd 0:0:0:0: [sda] Attached SCSI disk                          
[    3.954876] sd 0:0:0:0: Attached scsi generic sg0 type 0                  
[    3.958933] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5                                                               
[    4.185827] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray                                                                      
[    4.185830] Uniform CD-ROM driver Revision: 3.20                          
[    4.185912] sr 1:0:0:0: Attached scsi CD-ROM sr0                          
[    4.185947] sr 1:0:0:0: Attached scsi generic sg1 type 5                  
[    4.186463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver    
[    4.186555] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17                                                                          
[    4.186579] ehci_hcd 0000:00:12.2: setting latency timer to 64            
[    4.186583] ehci_hcd 0000:00:12.2: EHCI Host Controller                   
[    4.186638] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1                                                                       
[    4.186733] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround                                                                      
[    4.186753] ehci_hcd 0000:00:12.2: debug port 1                           
[    4.186772] ehci_hcd 0000:00:12.2: irq 17, io mem 0x52409500              
[    4.196064] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00             
[    4.196136] usb usb1: configuration #1 chosen from 1 choice               
[    4.196159] hub 1-0:1.0: USB hub found                                    
[    4.196167] hub 1-0:1.0: 6 ports detected                                 
[    4.196371] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19                                                                          
[    4.196381] ehci_hcd 0000:00:13.2: setting latency timer to 64            
[    4.196384] ehci_hcd 0000:00:13.2: EHCI Host Controller                   
[    4.196430] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2                                                                       
[    4.196519] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround                                                                      
[    4.196538] ehci_hcd 0000:00:13.2: debug port 1                           
[    4.196550] ehci_hcd 0000:00:13.2: irq 19, io mem 0x52409400              
[    4.208053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00             
[    4.208099] usb usb2: configuration #1 chosen from 1 choice               
[    4.208121] hub 2-0:1.0: USB hub found                                    
[    4.208127] hub 2-0:1.0: 6 ports detected                                 
[    4.208273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver        
[    4.208352] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                          
[    4.208363] ohci_hcd 0000:00:12.0: setting latency timer to 64            
[    4.208366] ohci_hcd 0000:00:12.0: OHCI Host Controller                   
[    4.208401] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3                                                                       
[    4.208499] ohci_hcd 0000:00:12.0: irq 16, io mem 0x52408000              
[    4.268065] usb usb3: configuration #1 chosen from 1 choice               
[    4.268084] hub 3-0:1.0: USB hub found                                    
[    4.268093] hub 3-0:1.0: 3 ports detected                                 
[    4.268233] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                          
[    4.268243] ohci_hcd 0000:00:12.1: setting latency timer to 64            
[    4.268246] ohci_hcd 0000:00:12.1: OHCI Host Controller                   
[    4.268279] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4                                                                       
[    4.268294] ohci_hcd 0000:00:12.1: irq 16, io mem 0x52407000              
[    4.328011] usb usb4: configuration #1 chosen from 1 choice               
[    4.328082] hub 4-0:1.0: USB hub found                                    
[    4.328091] hub 4-0:1.0: 3 ports detected                                 
[    4.328231] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17                                                                          
[    4.328241] ohci_hcd 0000:00:13.0: setting latency timer to 64            
[    4.328244] ohci_hcd 0000:00:13.0: OHCI Host Controller                   
[    4.328280] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5                                                                       
[    4.328371] ohci_hcd 0000:00:13.0: irq 17, io mem 0x52406000              
[    4.388011] usb usb5: configuration #1 chosen from 1 choice               
[    4.388082] hub 5-0:1.0: USB hub found                                    
[    4.388091] hub 5-0:1.0: 3 ports detected                                 
[    4.388230] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17                                                                          
[    4.388240] ohci_hcd 0000:00:13.1: setting latency timer to 64            
[    4.388243] ohci_hcd 0000:00:13.1: OHCI Host Controller                   
[    4.388275] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6                                                                       
[    4.388291] ohci_hcd 0000:00:13.1: irq 17, io mem 0x52405000              
[    4.448070] usb usb6: configuration #1 chosen from 1 choice               
[    4.448088] hub 6-0:1.0: USB hub found                                    
[    4.448097] hub 6-0:1.0: 3 ports detected                                 
[    4.448238] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                                                          
[    4.448248] ohci_hcd 0000:00:14.5: setting latency timer to 64            
[    4.448251] ohci_hcd 0000:00:14.5: OHCI Host Controller                   
[    4.448286] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7                                                                       
[    4.448309] ohci_hcd 0000:00:14.5: irq 18, io mem 0x52404000              
[    4.508110] usb usb7: configuration #1 chosen from 1 choice               
[    4.508129] hub 7-0:1.0: USB hub found                                    
[    4.508202] hub 7-0:1.0: 2 ports detected                                 
[    4.508341] uhci_hcd: USB Universal Host Controller Interface driver      
[    4.508425] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12                                                                     
[    4.510987] i8042.c: Detected active multiplexing controller, rev 1.1.    
[    4.512088] serio: i8042 KBD port at 0x60,0x64 irq 1                      
[    4.512092] serio: i8042 AUX0 port at 0x60,0x64 irq 12                    
[    4.512094] serio: i8042 AUX1 port at 0x60,0x64 irq 12                    
[    4.512096] serio: i8042 AUX2 port at 0x60,0x64 irq 12                    
[    4.512098] serio: i8042 AUX3 port at 0x60,0x64 irq 12                    
[    4.524096] mice: PS/2 mouse device common for all mice                   
[    4.572177] rtc_cmos 00:07: RTC can wake from S4                          
[    4.572212] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0         
[    4.572239] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs        
[    4.572296] device-mapper: uevent: version 1.0.3                          
[    4.572463] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com                                                           
[    4.572507] device-mapper: multipath: version 1.0.5 loaded                
[    4.572510] device-mapper: multipath round-robin: version 1.0.0 loaded    
[    4.572574] cpuidle: using governor ladder                                
[    4.572575] cpuidle: using governor menu                                  
[    4.572969] TCP cubic registered                                          
[    4.573035] NET: Registered protocol family 10                            
[    4.573403] lo: Disabled Privacy Extensions                               
[    4.573659] NET: Registered protocol family 17                            
[    4.573681] Bluetooth: L2CAP ver 2.11                                     
[    4.573682] Bluetooth: L2CAP socket layer initialized                     
[    4.573685] Bluetooth: SCO (Voice Link) ver 0.6                           
[    4.573686] Bluetooth: SCO socket layer initialized                       
[    4.573719] Bluetooth: RFCOMM socket layer initialized                    
[    4.573726] Bluetooth: RFCOMM TTY layer initialized                       
[    4.573727] Bluetooth: RFCOMM ver 1.10                                    
[    4.573747] powernow-k8: Found 1 AMD Sempron(tm) SI-42 processors (1 cpu cores) (version 2.20.00)                                                      
[    4.573796] powernow-k8:    0 : pstate 0 (2100 MHz)                       
[    4.573798] powernow-k8:    1 : pstate 1 (1100 MHz)                       
[    4.574066] registered taskstats version 1                                
[    4.574204]   Magic number: 9:912:554                                     
[    4.574260] pci_link PNP0C0F:05: hash matches                             
[    4.574269] acpi PNP0C01:00: hash matches                                 
[    4.574321] rtc_cmos 00:07: setting system clock to 2009-09-13 23:32:10 UTC (1252884730)                                                               
[    4.574324] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found          
[    4.574326] EDD information not available.                                
[    4.574374] Freeing unused kernel memory: 532k freed                      
[    4.574668] Write protecting the kernel read-only data: 6688k             
[    4.609474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4                                                         
[    4.796072] usb 4-2: new full speed USB device using ohci_hcd and address 2                                                                            
[    4.968610] usb 4-2: configuration #1 chosen from 1 choice                
[    4.981991] tg3.c:v3.94 (August 14, 2008)                                 
[    4.982079] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16  
[    4.982091] tg3 0000:02:00.0: setting latency timer to 64                 
[    5.524890] eth0: Tigon3 [partno(BCM95751) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:24:81:35:9f:5c                              
[    5.524895] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]                                                                      
[    5.524897] eth0: dma_rwctrl[76180000] dma_mask[64-bit]                   
[    5.650929] PM: Starting manual resume from disk                          
[    5.650933] PM: Resume from partition 8:5                                 
[    5.650934] PM: Checking hibernation image.                               
[    5.651251] PM: Resume from disk failed.                                  
[    5.657030] EXT4-fs: INFO: recovery required on readonly filesystem.      
[    5.657034] EXT4-fs: write access will be enabled during recovery.        
[    5.687323] EXT4-fs: barriers enabled                                     
[    7.560259] kjournald2 starting.  Commit interval 5 seconds               
[    7.560279] EXT4-fs: delayed allocation enabled                           
[    7.560281] EXT4-fs: file extents enabled                                 
[    7.582460] EXT4-fs: mballoc enabled                                      
[    7.582463] EXT4-fs: sda1: orphan cleanup on readonly fs                  
[    7.582471] ext4_orphan_cleanup: deleting unreferenced inode 5520         
[    7.582508] ext4_orphan_cleanup: deleting unreferenced inode 6842         
[    7.582518] ext4_orphan_cleanup: deleting unreferenced inode 279083       
[    7.582526] ext4_orphan_cleanup: deleting unreferenced inode 279228       
[    7.582589] ext4_orphan_cleanup: deleting unreferenced inode 279227       
[    7.582604] ext4_orphan_cleanup: deleting unreferenced inode 49613        
[    7.582611] EXT4-fs: sda1: 6 orphan inodes deleted                        
[    7.582613] EXT4-fs: recovery complete.                                   
[    8.074509] EXT4-fs: mounted filesystem with ordered data mode.           
[   11.849557] udev: starting version 141                                    
[   12.035680] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0                                                                   
[   12.035685] shpchp 0000:00:01.0: Cannot reserve MMIO region               
[   12.035733] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4  
[   12.085537] tpm_inf_pnp 00:03: Found GTPM with ID IFX0102                 
[   12.085655] tpm_inf_pnp 00:03: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)                                                               
[   12.111416] lis3lv02d: laptop model unknown, using default axes configuration                                                                          
[   12.127053] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5                                                             
[   12.145025] lis3lv02d driver loaded.                                      
[   12.241690] ieee80211_crypt: registered algorithm 'NULL'                  
[   12.245961] wl: module license 'MIXED/Proprietary' taints kernel.         
[   12.248739] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17   
[   12.248749] wl 0000:03:00.0: setting latency timer to 64                  
[   12.774556] [fglrx] Maximum main memory to use for locked dma buffers: 657 MBytes.                                                                     
[   12.774581] [fglrx]   vendor: 1002 device: 9612 count: 1                  
[   12.774725] [fglrx] ioport: bar 1, base 0x3000, size: 0x100               
[   12.774740] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18  
[   12.774745] pci 0000:01:05.0: setting latency timer to 64                 
[   12.775054] [fglrx] Driver built-in PAT support is enabled successfully   
[   12.775097] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1 minors                                                                          
[   12.794621] acpi device:03: registered as cooling_device6                 
[   12.795601] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6                                             
[   12.818060] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0                                                                       
[   12.820277] ACPI: Video Device [IGFX] (multi-head: yes  rom: no  post: no)
[   12.840906] ieee80211_crypt: registered algorithm 'TKIP'                  
[   12.841272] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9   
[   12.852833] leds-hp-disk driver loaded.                                   
[   12.894811] input: PC Speaker as /devices/platform/pcspkr/input/input7    
[   13.027879] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume                                                    
[   13.093575] HDA Intel 0000:00:14.2: power state changed by ACPI to D0     
[   13.093588] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                                                         
[   13.687118] lp: driver loaded but no devices found                        
[   13.781251] Adding 2200864k swap on /dev/sda5.  Priority:-1 extents:1 across:2200864k                                                                  
[   13.970806] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000                                                                
[   14.016561] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8                                                           
[   14.330283] EXT4 FS on sda1, internal journal on sda1:8                   
[   15.331827] type=1505 audit(1252884741.253:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2045                          
[   15.331986] type=1505 audit(1252884741.253:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2045                                
[   15.332036] type=1505 audit(1252884741.253:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2045  
[   15.332106] type=1505 audit(1252884741.257:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2045       
[   15.463125] type=1505 audit(1252884741.385:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2050                 
[   15.463330] type=1505 audit(1252884741.385:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2050                                
[   15.495196] type=1505 audit(1252884741.417:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2054                              
[   18.013367] Bluetooth: BNEP (Ethernet Emulation) ver 1.3                  
[   18.013370] Bluetooth: BNEP filters: protocol multicast                   
[   18.050136] Bridge firewalling registered                                 
[   19.168585] ppdev: user-space parallel port driver                        
[   22.439426] [fglrx] GART Table is not in FRAME_BUFFER range               
[   23.040422] fglrx_pci 0000:01:05.0: irq 2300 for MSI/MSI-X                
[   23.053481] [fglrx] Firegl kernel thread PID: 2993                        
[   23.066055] APIC error on CPU0: 00(08)                                    
[   23.074751] tg3 0000:02:00.0: irq 2299 for MSI/MSI-X                      
[   23.160316] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.169386] [fglrx] Gart USWC size:303 M.
[   23.169391] [fglrx] Gart cacheable size:60 M.
[   23.169397] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   23.169399] [fglrx] Reserved FB block: Unshared offset:11ffb000, size:5000
[   28.692075] eth1: no IPv6 routers present
[   31.450541] CPU0 attaching NULL sched-domain.
[   31.460220] CPU0 attaching NULL sched-domain.
[  456.738306] ACPI: Transitioning device [FAN2] to D0
[  456.738310] ACPI: Unable to turn cooling device [ffff88002f8478a0] 'on'
[  456.741816] ACPI: Transitioning device [FAN2] to D0
[  456.741818] ACPI: Unable to turn cooling device [ffff88002f8478a0] 'on'
[  777.848523] TKIP: RX tkey->key_idx=1 frame keyidx=2 priv=ffff88001c0b6180
[  779.843463] TKIP: RX tkey->key_idx=1 frame keyidx=2 priv=ffff88001c0b6180
[  781.865642] TKIP: RX tkey->key_idx=1 frame keyidx=2 priv=ffff88001c0b6180
Infatti credo che basterebbe solo capire cosa dovrei inserire su "please enter port where phone is connected" (sulla configurazione di wammu). Non ho altri modi per collegarlo dato che il mio notebook è sprovvisto del bluetooth. Vi prego di aiutarmi grazie mille
__________________
----------------- Mercatino Personale ------------------
[Notebook] [Componenti vari] [Ram notebook]
Commenti trattive da me concluse con: egounix Andrea850 sergi91 MATTEW1
lupo lucio è offline   Rispondi citando il messaggio o parte di esso
Old 14-09-2009, 10:04   #37
Mory
Senior Member
 
L'Avatar di Mory
 
Iscritto dal: Oct 1999
Città: Tra Como e Varese
Messaggi: 2792
apri una console e scrivi questo comando

tail -f /var/log/syslog

dopo colleghi il tel e vedi cosa ti dice
__________________
https://www.duckintour.it
Mory è offline   Rispondi citando il messaggio o parte di esso
Old 14-09-2009, 18:10   #38
lupo lucio
Senior Member
 
Iscritto dal: Oct 2005
Città: Campofilone (Ascoli Piceno)
Messaggi: 467
Quote:
Originariamente inviato da Mory Guarda i messaggi
apri una console e scrivi questo comando

tail -f /var/log/syslog

dopo colleghi il tel e vedi cosa ti dice
Ciao grazie mille per l'aiuto che mi stai dando. Una volta eseguito il comando da te consigliato mi restituisce questo:
Codice:
Sep 14 17:59:53 tuxdj-laptop kernel: [11642.080125] usb 4-3: new full speed USB device using ohci_hcd and address 4
Sep 14 17:59:53 tuxdj-laptop kernel: [11642.281261] usb 4-3: configuration #1 chosen from 1 choice
Sep 14 18:00:02 tuxdj-laptop /USR/SBIN/CRON[16311]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd hourly 2>/dev/null)
Sep 14 18:00:02 tuxdj-laptop /USR/SBIN/CRON[16312]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Sep 14 18:00:14 tuxdj-laptop kernel: [11663.033258] usb 4-3: USB disconnect, address 4
Sep 14 18:01:06 tuxdj-laptop kernel: [11714.524130] usb 4-3: new full speed USB device using ohci_hcd and address 5
Sep 14 18:01:06 tuxdj-laptop kernel: [11714.731978] usb 4-3: configuration #1 chosen from 1 choice
Sep 14 18:02:44 tuxdj-laptop NetworkManager: <info>  (eth1): supplicant connection state:  completed -> group handshake
Sep 14 18:02:44 tuxdj-laptop NetworkManager: <info>  (eth1): supplicant connection state:  group handshake -> completed
e poi inserendo il cavo usb del cellulare mi da anche:
Quote:
Sep 14 18:05:17 tuxdj-laptop kernel: [11965.997538] usb 4-3: USB disconnect, address 5
Sep 14 18:05:43 tuxdj-laptop kernel: [11991.788124] usb 4-3: new full speed USB device using ohci_hcd and address 6
Sep 14 18:05:43 tuxdj-laptop kernel: [11991.965295] usb 4-3: configuration #1 chosen from 1 choice
__________________
----------------- Mercatino Personale ------------------
[Notebook] [Componenti vari] [Ram notebook]
Commenti trattive da me concluse con: egounix Andrea850 sergi91 MATTEW1
lupo lucio è offline   Rispondi citando il messaggio o parte di esso
Old 14-09-2009, 18:23   #39
lupo lucio
Senior Member
 
Iscritto dal: Oct 2005
Città: Campofilone (Ascoli Piceno)
Messaggi: 467
adesso cosa dovrei scrivere su wammu, ovvero quando mi chiede "please enter port where phone is connected"?
__________________
----------------- Mercatino Personale ------------------
[Notebook] [Componenti vari] [Ram notebook]
Commenti trattive da me concluse con: egounix Andrea850 sergi91 MATTEW1
lupo lucio è offline   Rispondi citando il messaggio o parte di esso
Old 17-09-2009, 16:02   #40
lupo lucio
Senior Member
 
Iscritto dal: Oct 2005
Città: Campofilone (Ascoli Piceno)
Messaggi: 467
Ragazzi vi prego cercate di aiutarmi non riesco proprio a capire quale sia la porta seriale del cellulare
__________________
----------------- Mercatino Personale ------------------
[Notebook] [Componenti vari] [Ram notebook]
Commenti trattive da me concluse con: egounix Andrea850 sergi91 MATTEW1
lupo lucio è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ultrawide si fondono ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ul...
Dreame L10s Pro Ultra Heat: la pulizia di casa tutta sostanza Dreame L10s Pro Ultra Heat: la pulizia di casa t...
HONOR Magic6 Pro: come funziona Magic Portal, il modo ''intelligente'' di condividere HONOR Magic6 Pro: come funziona Magic Portal, il...
L'innovazione richiede fiducia: Workday si propone come guida nell'era dell'IA L'innovazione richiede fiducia: Workday si propo...
Recensione HONOR Pad 9: ampio display e audio top per il tablet per l'intrattenimento Recensione HONOR Pad 9: ampio display e audio to...
2 iRobot Roomba al prezzo più sco...
La tua connessione in fibra ottica potre...
Il controller DualSense per PS5 con un p...
Take-Two acquisisce Gearbox per 460 mili...
NVIDIA H100, H200 e Intel Gaudi 2 si sfi...
Lamborghini, nuovo logo e font, ora abbr...
Xbox Series X si veste di bianco, ma &eg...
La Porsche Boxster elettrica beccata in ...
L'iPad da 10,9" (Wi-Fi, 64GB) è sceso a ...
Dell, calo del mercato PC: licenziati 13...
Alfa Romeo Milano, scopriamo profilo e l...
Hisense vende un TV FHD 32 pollici con Q...
Cisco Webex anche in auto: ora è ...
Phil Schiller, il boss dell'App Store di...
Lola in Formula E insieme a Yamaha, due ...
Chromium
GPU-Z
OCCT
LibreOffice Portable
Opera One Portable
Opera One 106
CCleaner Portable
CCleaner Standard
Cpu-Z
Driver NVIDIA GeForce 546.65 WHQL
SmartFTP
Trillian
Google Chrome Portable
Google Chrome 120
VirtualBox
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 15:08.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Served by www2v