|
Procedura completa per settare in Bridge technicolor v3
Al posto di IP_WAN sostituire Internet_ADSL o Internet_VDSL per chi ha la versione con queste diciture.
Disattivare il WiFi
telnet
open 192.168.1.254
user: Administrator
pass: [vuota]
ip ifconfig intf=IP_WAN ipv4=disabled
saveall
---------------------------------------------------------------------
PER CONNESSIONE VDSL e INTERNET_VDSL:
dhcp client ifdetach intf=Internet_VDSL
ip ifdetach intf=Internet_VDSL
eth ifdetach intf=ethoa_Internet
eth bridge config vlan=enabled filter=none
eth vlan add name=ponte vid=10
eth ifconfig intf=ethoa_Internet dest=bridge vlan=ponte
eth ifattach intf=ethoa_Internet
eth bridge ifadd intf=vdsl
eth bridge ifconfig intf=vdsl dest=efmif1
eth bridge ifattach intf=vdsl
eth bridge vlan ifadd intf=vdsl name=ponte
eth bridge vlan ifdelete intf=vdsl name=default
>>>Warning: default VLAN changed for bridge interface to VLAN ponte.
eth bridge vlan ifadd intf=ethport4 name=ponte
eth bridge vlan ifdelete intf=ethport4 name=default
>>>Warning: default VLAN changed for bridge interface to VLAN ponte.
ip ifattach intf=Internet_VDSL
saveall
---------------------------------------------------------------------
PER CONNESSIONE ADSL e INTERNET_ADSL:
dhcp client ifdetach intf=Internet_ADSL
ip ifdetach intf=Internet_ADSL
eth ifdetach intf=ethoa_Internet_adsl
eth bridge config vlan=enabled filter=none
eth vlan add name=ponte vid=10
eth ifconfig intf=ethoa_Internet_adsl dest=bridge vlan=ponte
eth ifattach intf=ethoa_Internet_adsl
eth bridge ifadd intf=adsl
eth bridge ifconfig intf=adsl dest=atm_Internet
eth bridge ifattach intf=adsl
eth bridge vlan ifadd intf=adsl name=ponte
eth bridge vlan ifdelete intf=adsl name=default
>>>Warning: default VLAN changed for bridge interface to VLAN ponte.
eth bridge vlan ifadd intf=ethport4 name=ponte
eth bridge vlan ifdelete intf=ethport4 name=default
>>>Warning: default VLAN changed for bridge interface to VLAN ponte.
ip ifattach intf=Internet_ADSL
saveall
---------------------------------------------------------------------
PER CONNESSIONE ADSL e IP_WAN ADSL:
dhcp client ifdetach intf=IP_WAN
ip ifdetach intf=IP_WAN
eth ifdetach intf=ETH_WAN
eth bridge config vlan=enabled filter=none
eth vlan add name=ponte vid=10
eth ifconfig intf=ETH_WAN dest=bridge vlan=ponte
eth ifattach intf=ETH_WAN
eth bridge ifdetach intf=BR_ADSL2
eth bridge ifdelete intf=BR_ADSL2
eth bridge ifadd intf=adsl
eth bridge ifconfig intf=adsl dest=atm_Internet
eth bridge ifattach intf=adsl
eth bridge vlan ifadd intf=adsl name=ponte
eth bridge vlan ifdelete intf=adsl name=default
eth bridge vlan ifadd intf=ethport4 name=ponte
eth bridge vlan ifdelete intf=ethport4 name=default
ip ifattach intf=IP_WAN
saveall
---------------------------------------------------------------------
PER CONNESSIONE VDSL e IP_WAN VDSL:
dhcp client ifdetach intf=IP_WAN
ip ifdetach intf=IP_WAN
eth ifdetach intf=ETH_WAN
eth bridge config vlan=enabled filter=none
eth vlan add name=ponte vid=10
eth ifconfig intf=ETH_WAN dest=bridge vlan=ponte
eth ifattach intf=ETH_WAN
eth bridge ifdetach intf=BR_VDSL2
eth bridge ifdelete intf=BR_VDSL2
eth bridge ifadd intf=vdsl
eth bridge ifconfig intf=vdsl dest=efmif1
eth bridge ifattach intf=vdsl
eth bridge vlan ifadd intf=vdsl name=ponte
eth bridge vlan ifdelete intf=vdsl name=default
>>>Warning: default VLAN changed for bridge interface to VLAN ponte.
eth bridge vlan ifadd intf=ethport4 name=ponte
eth bridge vlan ifdelete intf=ethport4 name=default
>>>Warning: default VLAN changed for bridge interface to VLAN ponte.
ip ifattach intf=IP_WAN
saveall
---------------------------------------------------------------------
Per mettere il ruoter su rete interna tramite porte 1,2 o 3 con un secondo cavo (per accedere alla configurazione (opzionale):
Ovvimanete al posto delle X date un IP compatibile con la rete del vostro router collegato al technicolor.
dhcp server config state disabled
ip ipadd addr X.X.X.X/24 intf LocalNetwork
ip ipdelete addr 192.168.1.254/24 intf LocalNetwork
saveall
---------------------------------------------------------------------
La porta 4 sarà l'uscita Modem che andrà attaccata con un cavo di rete all'ingresso WAN del vostro router.
Con un secondo cavo potete attaccare la porta 1 o 2 o 3 del technicolor a un ingresso del vostro router per potervi accedere sempre digitando l'indirizzo IP scelto appena prima.
-------------
Correggete se trovate errori.
Testato su Technicolor con ADSL e VDSL con dicitura IP_WAN
|