[misthral]

CPU Feature

Thermal Management Control:
PPM(EIST) Model:
Limit CPUID MaxVal:
CIE Function:
Execute Disable Bit:
Virtualization Technology:
Core Multi-Processing:

Exist Setup Shutdown: Mode 
CLOCK VC0 divider:
CPU Clock Ratio Unlock:
CPU Clock Ratio:
Target CPU Clock:
CPU Clock:
Boot Up Clock:
DRAM Speed:
Target DRAM Speed:
PCIE Clock: 100mhz

Voltage Settings

CPU VID Control:
CPU VID Special Add:
DRAM Voltage Control:
SB 1.05V Voltage:
SB Core/CPU PLL Voltage:
NB Core Voltage:
CPU VTT Voltage:
Vcore Droop Control:
Clockgen Voltage Control:
GTL+ Buffers Strength:
Host Slew Rate:
GTL REF Voltage Control:
CPU GTL1/3 REF Volt:
CPU GTL 0/2 REF Volt:
North Bridge GTL REF Volt:

DRAM Timing

Enhance Data transmitting:
Enhance Addressing:
DIMM 1 CLK fine delay:
DIMM 2 CLK fine delay:
DIMM 3 CLK fine delay: 
DIMM 4 CLK fine delay:

CAS Latency Time (tCL):
RAS# to CAS# Delay (tRCD):
RAS# Precharge (tRP):
Precharge Delay (tRAS):
All Precharge to Act:
REF to ACT Delay (tRFC):
Performance Level:
Read delay phase adjust:
MCH ODT Latency:
Write to PRE Delay (tWR):
Rank Write to Read (tWTR):
ACT to ACT Delay (tRRD):
Read to Write Delay (tRDWR):
Ranks Write to Write (tWRWR):
Ranks Read to Read (tRDRD):
Ranks Write to Read (tWRRD):
Read CAS# Precharge (tRTP):
ALL PRE to Refresh: 

PCIE Slot Config:
CPU Spread Spectrum:
PCIE Spread Spectrum:
SATA Spread Spectrum:

Eva2000 su i4memory